MachineU > China Products > Machinery > Machine Tool Equipment > Machining Centre & Parts > Machining Centre
VMC-1575HL Vertical Machining Centers Precision High Speed 3 Axis
VMC-1575HL Vertical Machining Centers Precision High Speed 3 Axis
Specifications
Brand Name :
Guss
Model Number :
VMC-1575HL
Place of Origin :
China
CNC System :
FANUC
Rapid Speed :
20000/20000/12000mm/min
Cutting Feed Speed :
1-10000mm/min
3-Axis Rated Power :
3.0/3.0/3.0kw
3-Axis Rated Torque :
27.0/27.0/27.0N.m
3-Axis Travel :
1300×700×700mm
MOQ :
1
Price :
negotiable
Packaging Details :
Different packaging methods are adopted according to different modes of transport.
Payment Terms :
Western Union, MoneyGram, T/T
Description
Product Features
  • Integrated Optimization: Structural Strengthening of Moving Components
  • Y-axis Lightening: Low-Center-of-Gravity Base Design
  • Component Optimization: Higher Load-Bearing Capacity
  • Cost Optimization Control: Achieve Extreme Cost-Effectiveness
Technical Specifications
Item Unit VMC-1575HL
System CNC System - FANUC
Rapid Speed mm/min 24000/24000/24000
Cutting Feed Speed mm/min 1-10000
3-Axis Rated Power Kw 3.0/3.0/3.0 [Note①]
3-Axis Rated Torque N.m 20.0/20.0/27.0 [Note①]
Worktable T-Slot Dimensions - 7-18-100
Worktable Dimensions mm 1600×700
Max Worktable Load Kg 1000
Travel 3-Axis Travel mm 1500×750×600 [Note②]
Distance from Spindle Nose to Worktable mm 150-750
Spindle Spindle Power Kw 11-15
Max Spindle Speed rpm 10000(Belt)/12000(Direct Drive)/15000(Direct Drive)
Spindle Taper - BT40 [Note③]
Transmission Screw Diameter/Pitch mm Φ40D12/Φ40D12/Φ40D12
Linear Rail Brand/Type/Width - PMI Roller 45mm/Roller 55mm/Roller 45mm [Note④]
Number of Rails/Sliders Pcs 2-6/2-4/2-6
Tool Magazine Tool Magazine Capacity Pcs 24 [Note⑤]
BT/BBT Pull Stud Angle ° 45°
Max Tool Diameter mm Φ80(Full Magazine)/Φ150(Empty Adjacent Tool)
Max Tool Length/Weight mm/kg 300/8
Tool Change Time s 1.3
Partial Configuration Automatic Chip Removal - Rear Flushing
Automatic Lubrication System - Thin Oil Lubrication
Electrical Cabinet Cooling - Heat Exchanger
Accuracy Positioning Accuracy (Full Travel) mm 0.008
Repeat Positioning Accuracy (Full Travel) mm 0.006
Others Air Supply Flow/Pressure - Flow 150(L/min)/Pressure(6Bar)
Total Power Kw 30
Machine Weight Kg 8300
Machine Overall Dimensions (L×W×H) mm 3800×2900×2900 [Note⑥]

Standard Configuration:

Mechanical manual tool magazine,rear-flush chip removal,spindle oil cooler,water gun,air gun,spindle air curtain,spindle ring spray,centralized lubrication,air source treatment,oil-water separation,heat exchanger,nitrogen balance

Optional Configuration:

Mitsubishi/Syntec system,hollow screw,chain-type chip removal,grease lubrication,electrical cabinet air conditioner,4-axis,5-axis,column heightening,tool internal cooling,fixtures,clamps

※ The product’s appearance and configuration will be updated with technological development (but will not be lower than current technical requirements). No separate notification will be given; specific details shall be subject to the technical agreement at the time of purchase.

Note ①: The 3-axis power and torque are based on FANUC. For detailed information on Mitsubishi, Syntec and other systems, please consult the corresponding account manager.

Note ②: This model is designed for export (considering container height), so the standard Z-axis travel is 600mm; domestic customers can opt for the model with 700mm Z-axis travel.

Note ③: Optional BT50-155 spindle.

Note ④: In case of stock shortage, equivalent specifications (e.g., HIWIN, Rexroth, THK) will be used as substitutes. No separate notification will be given.

Note ⑤: Optional 30-tool capacity for the tool magazine.

Note ⑥:This dimension does not include the water tank (the width of the rear-flush water tank increases by 550mm) or the chain (the length of the chain increases by 1000mm). Select one option based on the actual configuration.

Send your message to this supplier
Send Now

VMC-1575HL Vertical Machining Centers Precision High Speed 3 Axis

Ask Latest Price
Product Detail
Brand Name :
Guss
Model Number :
VMC-1575HL
Place of Origin :
China
CNC System :
FANUC
Rapid Speed :
20000/20000/12000mm/min
Cutting Feed Speed :
1-10000mm/min
Contact Supplier
VMC-1575HL Vertical Machining Centers Precision High Speed 3 Axis

Guchi Intelligent Equipment (Jiangsu) Co., Ltd.

Verified Supplier
1 Years
zhenjiang
Since 2022
Business Type :
Manufacturer
Main Products :
Aluminium Profile Machining Center, GLM-1814HL, TAP-640
Total Annual :
>1000000
Employee Number :
>100
Certification Level :
Verified Supplier
Discover similar products
View More

Find Similar Products By Category:

Supplier Homepage Products VMC-1575HL
MachineU China Products Machinery Machine Tool Equipment Machining Centre & Parts Machining Centre
Contact Supplier
Submit Requirement