BSD-68610 SP Grade Gasoline Engine Oil Compound Additive

Product Performance

This product is compounded with high-quality magnesium salt and calcium salt detergents, borated ashless dispersants, antioxidant and anticorrosion additives, as well as high-temperature antioxidants. In the appropriate formulation system of base oil and viscosity index improver, it can meet the performance requirements of SP Grade gasoline engine oils and cover most viscosity grades. It has good engine cleaning ability, oxidation resistance, antiwear performance and the ability to suppress low-speed pre-ignition. The formulated oil is suitable for various middle and high grade car engines.

Scope of Application and Recommended Dosage

It is formulated with API Group II, III and IV base oils and blended with viscosity index improvers, pour point depressants and anti-foaming agent.

Technical Parameter

Product Appearance

Packaging and Acceptance

• This product is packaged in standard iron drums, or in BIC ton drums or other packaging forms according to customer needs.

• Product identification, sample retention, and delivery acceptance shall be carried out in accordance with SH/T0164 standard.

Product Storage, Transportation, and Compounding Agent Blending Operations and Precautions

• The product shall be stored, loaded and unloaded in accordance with the SH/T0164 standard, and must be clearly labeled during transportation, storage and use to prevent mixing and cross contamination with other petroleum products.

• When adjusting oil, the maximum temperature should not exceed 75 ℃.

• Long term storage temperature should not exceed 50 ℃.

• Single dose and composite product shelf life: 24 months (at ambient temperature). After opening and using, pay attention to sealed storage.

Health and Safety

• The products in this manual are non flammable, non explosive, and non corrosive, and are similar to general petroleum products in terms of safety, environmental protection, and use.
• Avoid prolonged or repeated contact with the skin during use, prevent accidental ingestion, and keep away from children.
• Wear protective gloves when using, and the operator does not need to take special safety precautions. Once it splashes into the eyes or skin, rinse thoroughly with plenty of water.
• Store the product in a cool, dry, and well ventilated place, away from sources of fire. Heat source.
• Waste packaging materials, oil liquids, and waste residues should be handed over to qualified units for recycling and disposal, and are prohibited from being discharged into water bodies or soil.
• For other health and safety information, please refer to the Product Safety Data Sheet (MSDS).