Replace BöRger Rotary Lobe Pump PL 200 For Primary Sludge


Product Description:

Rotary lobe pumps are positive displacement pumps. The rotation of the lobes creates a vacuum on the suction side, which draws in the pumped medium. The lobes drive the medium along the pump wall into the pressure area. Two to six room fillings are displaced with one drive rotation, depending on the number of rotor blades. This also allows you to dose in proportion to the speed. When the pump is at a standstill, rubber-coated rotors seal off the flow almost entirely and thus ensure that the rotary lobe pump functions smoothly. Lobes without rubber linings, on the other hand, are undersized to reduce friction, so a complete seal is not possible. The design of the pump also makes it insensitive to dry running and allows you to have fully functional pumping regardless of the direction of rotation.

Technical Date:

Specifications:

Note: Above flange is regular for each model, besides we also offer various flange connection according to your requirements

Function

Due to the unique separation between the pump and gear chamber, the ACCUVON lobe pump offer you maximum operational safety. This means that no penetration of the medium into the bearing housing is possible in the case of a product leak. In addition, the innovative design allows you to inspect the mechanical seals visually. This enables you to react at an early stage if necessary. Thanks to the function of the rotary lobe pumps, you can also safely convey both low and high viscosity media. Due to the significant free ball passage and the low speeds, the positive displacement pumps are insensitive to blockages, clogging and foreign bodies. Varying solids contents have just as little influence on the flow rate as pressure changes. This enables continuous and powerful pumping.

Testing Photo