MachineU > China Products > Electrical Equipment & Supplies
2 Wire Signal SPD Network Surge Arrester 5V 60V DC 5Vdc 10kV PLC Sensor Full Mode
2 Wire Signal SPD Network Surge Arrester 5V 60V DC 5Vdc 10kV PLC Sensor Full Mode
2 Wire Signal SPD Network Surge Arrester 5V 60V DC 5Vdc 10kV PLC Sensor Full Mode
2 Wire Signal SPD Network Surge Arrester 5V 60V DC 5Vdc 10kV PLC Sensor Full Mode
Specifications
Brand Name :
LLH
Model Number :
LS-5W2
Place of Origin :
Guangdong Province.China
MOQ :
1 piece
Payment Terms :
L/C,D/A,D/P,T/T,Western Union
Supply Ability :
5000-10000 pieces/mouth
Delivery Time :
7-15 days
Packaging Details :
box
Price :
US $10/ Piece
Standards :
IEC 61643.21
Nominal Operating Voltage (Un) :
5Vdc / 12Vdc / 24Vdc / 48Vdc
Maximum Continuous Operating Voltage (Uc) :
6Vdc / 18Vdc / 32Vdc / 60Vdc
Shock Rating (X-X,X-C C2) :
10kV/5kA
Shock Rating (X-X,X-C B2) :
4kV(10/700μs)
Shock Rating (X-X,X-C D1) :
2.5kA(10/350μs)
Voltage Protection Level (X-X @C2) :
≤15V / ≤30V / ≤60V / ≤95V
Response Time (tA) :
≤1ns
Description

LS-W2 Series Ultra-Thin 2-Wire Control Signal Lightning Arrester (Full-Mode) is designed for communication equipment such as dedicated communication lines, telemetry signals, measurement and control signals, PLC analog control systems, and 4-20mA current loops. Suitable for installation in LPZ 2-3 and subsequent lightning protection zones, it provides full-mode fine protection for two signal lines.

Featuring an ultra-thin design (7mm thickness), the product saves space in control cabinets, making it ideal for space-constrained environments. The module comes with guide rail ground contact, enhancing grounding reliability. The multi-level protection circuit ensures high flow rate and low residual voltage, covering both line-line and line-ground surge paths.

Product Features
● Ultra-thin design saves space.
● The module comes with guide rail ground contact.
● High flow rate, low residual pressure.
● Full-mode precision protection.
● Suitable for installation in LPZ 2-3 and subsequent lightning protection zones, it is a lightning arrester for communication equipment such as communication dedicated lines, telemetry signals, measurement and control signals, PLC analog control systems, and 4-20mA current loops.

Product Specification

2 Wire Signal SPD Network Surge Arrester 5V 60V DC 5Vdc 10kV PLC Sensor Full Mode

StandardsIEC 61643.21
ModelsLS-5W2LS-12W2LS-24W2LS-48W2
Parameter
Nominal operating voltage Un5Vdc12Vdc24Vdc48Vdc
Maximum continuous operating voltage Uc6Vdc18Vdc32Vdc60Vdc
X-X,X-C Shock rating C2
10kV/5kA
X-X,X-C Shock rating B24kV(10/700μs)
X-X,X-C Shock rating D12.5kA(10/350μs)
X-X Up@C2≤15V≤30V≤60V≤95V
X-C Up@C2≤15V≤30V≤60V≤95V
X-X Up@B2≤10V≤25V≤45V≤60V
X-C Up@B2≤10V≤25V≤45V≤60V
Response time tA≤1ns
Load current IR500mA
Line to line bandwidth fG3MHz
Protective LineX1-X2,X1-C,X2-C

Mechanical parameters
Installation method
DIN Rail 35mm
Screw torque
1N*m
Strip length
10mm
Wiring cross-sectional area
0.5mm²-2.5mm²
Product size
90mmx65mmx7mm
Shell material and flame retardant grade
ABS,UL 94 V-0
Installation location
Indoor
Shell protection rating
IP20
Temperature range
-40℃…+80℃
Humidity range
Relative humidity≤95%

Notices

1.The ultra-thin design (7mm) saves space, but avoid installing in areas with strong mechanical impact.

2.Select the model based on the signal line's nominal operating voltage (5Vdc/12Vdc/24Vdc/48Vdc).

3.The module comes with guide rail ground contact; ensure the DIN Rail is properly grounded.

4.Use wiring with cross-sectional area 0.5mm²-2.5mm² and tighten screws to 1N·m torque.

5.Avoid installing in environments with strong electromagnetic interference to prevent signal distortion.

6.Regularly inspect the module for loose connections or physical damage; replace if faulty.

FAQ

Q1: What is the thickness of the product?

A1: The product thickness is only 7mm, featuring an ultra-thin design to save space in control cabinets.

Q2: What is the function of the guide rail ground contact?

A2: It enhances grounding reliability by utilizing the DIN Rail as a ground path, simplifying installation.

Q3: What is the load current capacity of the product?

A3: The maximum load current is 500mA, suitable for most industrial control signal lines.

Q4: Does the product require external power supply?

A4: No, it is passive and does not require external power supply, drawing minimal power from the signal line.

Q5: Can it be used for both DC and AC signal lines?

A5: It is specifically designed for DC signal lines (5Vdc/12Vdc/24Vdc/48Vdc). For AC signals, choose dedicated AC signal SPD models.

Send your message to this supplier
Send Now

2 Wire Signal SPD Network Surge Arrester 5V 60V DC 5Vdc 10kV PLC Sensor Full Mode

Ask Latest Price
Product Detail
Brand Name :
LLH
Model Number :
LS-5W2
Place of Origin :
Guangdong Province.China
MOQ :
1 piece
Payment Terms :
L/C,D/A,D/P,T/T,Western Union
Supply Ability :
5000-10000 pieces/mouth
Contact Supplier
2 Wire Signal SPD Network Surge Arrester 5V 60V DC 5Vdc 10kV PLC Sensor Full Mode
2 Wire Signal SPD Network Surge Arrester 5V 60V DC 5Vdc 10kV PLC Sensor Full Mode

Shenzhen LLH Electrical Co., Ltd.

Verified Supplier
1 Years
shenzhen
Since 2018
Business Type :
Manufacturer
Main Products :
Surge Protection Device, T2 SPD, Signal SPD
Total Annual :
1000000-10000000
Employee Number :
20~100
Certification Level :
Verified Supplier
Discover similar products
View More

Find Similar Products By Category:

Supplier Homepage Products Signal SPD
MachineU China Products Electrical Equipment & Supplies
Contact Supplier
Submit Requirement