LS-100M-8/LS-100M/POE-8 is an 8-port 100M network signal surge protector designed for 100 BASE-T 802.3 computer network systems, suitable for installation in LPZ 2-3 and subsequent lightning protection zones. It features a compact flat/wall mounting design, making it ideal for small businesses, retail stores, and home offices.

Integrated with 8-channel independent protection circuits, the product minimizes mutual interference between ports. The unique anti-interference wiring design meets 100M network communication requirements, while the single-stage high-energy device parallel protection circuit delivers low residual voltage. The LS-100M/POE-8 model supports 48Vdc POE power supply, catering to POE-enabled devices such as IP cameras and wireless access points.

Product Specification

Notices

1.Use the provided mounting holes (190mmx66mm) for secure wall installation.

2.For POE models, confirm the POE power supply voltage matches 48Vdc.

3.Use Cat-5 or higher grade cables to ensure 100Mbit/s transmission speed.

4.Properly ground the SPD to guarantee surge diversion; ground resistance ≤4Ω is recommended.

5.Regularly inspect the ports for loose connections or physical damage.

6.Failure is indicated by signal interruption; troubleshoot or replace the product if multiple ports fail.

FAQ

Q1: How many ports does this product have?

A1: It has 8 protected ports, suitable for small-scale network deployments.

Q2: Can it protect both signal and POE power lines?

A2: Yes, POE models provide separate protection for 100M network signals (lines 1-2､3-6) and POE power lines (lines 4､5-7､8).

Q3: What is the installation method?

A3: It supports flat or wall mounting with mounting hole spacing of 190mmx66mm.

Q4: What is the housing material and size?

A4: The housing is cold-rolled steel sheet (black painted) with dimensions 204mmx117mmx48mm.

Q5: Is it suitable for outdoor use?

A5: No, it is designed for indoor use (IP20) in small offices and equipment rooms.