The Ora Ballet Cat borrows its shape from the small hatchbacks of sixty years ago: a rounded tail, a steeply raked rear screen and a short, upright boot lid set high in the body. The proportions look charming and behave awkwardly, because the handle sits above the shoulder line and the lid is glass heavy for its size. The original struts hold the panel up, yet they let it drop quickly once the gas charge has aged a season or two.

This kit takes the manual effort out of that lid. Twin electric actuators replace the struts on the original mounting points, a controller sits behind the rear quarter trim, and the wiring reaches the factory connector. The car keeps its look, its badge and its resale value, and the conversion can be undone in half an hour.

What the driver notices first

Three points that matter in daily use

Electric trunk lift module matched to a small glass lid. Each actuator is rated 480 N and the pair is set for a panel of up to 30 kg, which keeps the movement gentle and quiet instead of the sharp snap that heavier SUV hardware produces on a light hatchback. The speed curve slows near the top so the lid does not rock the hinges.

Auto tailgate actuator kit that keeps the factory remote. Nothing extra has to be carried, paired or recharged. The boot button on the lid still works as an electric trigger, and the car needs no coding session at a dealer, which suits owners outside the main dealer network.

Car electric trunk lifter kit with quiet closing. The final travel is damped so the lock catches without a slam, the lid reverses on contact with an arm or a bag, current is limited at the end of the stroke, and a 15A fuse protects the circuit.

Technical data

Fitting, step by step

Packing and trade terms

Each set travels in a printed carton with an EPE moulded tray, 74x20x18 cm, two sets to a master carton, fasteners bagged by mounting position and a guide printed in English, Russian or Spanish. Units are cycled on the bench and checked for force, current draw and reverse response before sealing. For importers we print neutral or private label cartons, add your own part numbers, translate the manual, and hold actuators, controllers and switches in stock so a claim never waits on a container.