Power Boot Opener Hands-free Power Tailgate Conversion Kit Automatic Boot Opening for Nissan Terra 4x4 2016-2024

This power tailgate conversion kit upgrades the manual tailgate of the Nissan Terra / XTerra 4x4 (2016-2024) into a hands-free automatic boot opener. The rear door can be released from the factory remote key, a dashboard switch, the tailgate handle or a light kick under the rear bumper, using a 12V brushless drive motor and vehicle-specific brackets. The system is supplied as a full electric tailgate retrofit kit with a plug-and-play harness, so 4x4 workshops can install it without cutting the body or disturbing the original electrical layout. For owners who load bikes, camping gear or tools, the automatic boot opening frees both hands and speeds up every loading cycle.

Key Selling Points

• Hands-Free Power Tailgate: A foot sensor opens or closes the tailgate while your hands stay on the load.
• Power Tailgate Conversion Kit: One complete set with motor, drive unit, control module, struts, brackets, wiring and hardware.
• Automatic Boot Opening: A single press raises the rear door to the programmed height and holds it open on uneven ground.
• Four Control Channels: Remote key, cabin button, tailgate handle and kick sensor operate together without conflicting commands.
• Anti-Pinch Safety: Hall-sensor detection reverses the tailgate instantly on resistance, and the system is locked unless the vehicle is in P gear.
• 4x4-Ready Construction: Corrosion-resistant brackets and a sealed drive unit suit dusty and wet off-road conditions.

Technical Specifications

Fitment & Applications

Built for the Nissan Terra / XTerra 4x4 produced between 2016 and 2024, a body-on-frame SUV whose tailgate is used constantly for work and leisure loads. The kit suits fleet operators, camper and overlanding converters, dealers and accessory shops. Because the factory latch and central locking stay in place, the vehicle keeps its original anti-theft behaviour and remote lock function.

Packing & Quality

Each set ships in a foam-lined export carton with labelled fastener bags. Every unit is function-tested before dispatch, including motor load, wiring continuity and sensor calibration. A 2-year warranty is provided along with installation guidance for overseas workshops.