Details:
1. Product features:
 
 1). Meet UL, CE requirements
 2). Ultra-thin, ultra-small
 3). All voltage input (AC: 90 ~ 264V)
 4). Low ripple and low noise
 5). Output overload and short circuit protection
 6). High efficiency, high power density
 7). The product is designed to meet the requirements of EMC and Safety Test
 8). Low power consumption, environmental protection, no-load loss <0.1W
 9).100% load aging and testing
 10).1 year warranty perio
 
 2. Environment Condition
 
 Item Name Technical Criteria Unit
 Operation Temperature -20—+60 ℃
 Store Temperature -40—+80 ℃
 Relative humidity 5—95 %
 Cooling way Cooling by radiation
 Atmospheric pressure 80—106 Kpa
 Sea level elevation ≤2000 m
 Vibration Vibration coefficient 10~500Hz,2G10min./1cycle, 60min.each along X,Y,Z axes
 
 3.Electrical Characteristic
 
 1. Input characteristics (test at room temperature 20 ℃).

| tems | Technical Parameters | Units | Notes | 
| No-load rated output voltage | 12±0.1 | Vdc | |
| Full-load tated output voltage | 12±0.2 | Vdc | |
| Short time maximum output current | ≥900 | mA | |
| Long time maximum output current | ≥830 | mA | |
| Voltage regulation | ±2 | % | |
| Load regulation | ±0.5 | % | |
| Output ripple and noise (mVp-p) | ≤70 Rated input voltage,output full load. With 20MHz bandwidth oscilloscope, Load side 10uF and 0.1uF capacitance test | mV | |
| Switching on/off overshoot amplitude | (Rated input voltage, output plus 10% load)≤5 | %Vo | |
| Output over-current protection | 110-150% of maximum output load | A | |
| Output short circuit protection | Direct short circuit in normal output and automatic return to nomal operation after removal of short circuit | No-damage to the whole device | 
 
 4.Safety Characteristics:
 
 4.1 Products designed to meet UL, CE safety certification requirements.
 4.2 Safety and electromagnetic compatibility
 Designed with the input of 0.5A UL certified insurance;
 PCB board using double-sided copper clad plate production, material for the 94-V0 fire rating level;
 Safety standards: Compliance with UL1012, EN60950, UL60950
 Insulation voltage: I / P-O / P: 2500VAC
 Insulation resistance :I / PO / P> 100M Ohms / 500VDC 25 ℃ 70% RH
 Conduction and radiation :comply with EN55011, EN55022 (CISPR22)
 Electrostatic discharge :IEC / EN 61000-4-2 level 4 8kV / 15kV
 RF radiation Immunity: IEC / EN 61000-4-3 See Application Note
 4.3 Temperature safety design
 At room temperature,the capacitors of this power , the inner surface of the main converter maximum temperature does not exceed 90
 ℃;
 Shell maximum surface temperature does not exceed 60 ℃
 
 
 5. Logo, packaging, transportation, storage
 
 5.1 Logo
 5.1.1 Product logo
 In place of products labeled with signs, its content in line with national standards, industry standards.
 5.1.2 Packaging logo
 Products marked with the manufacturer's name, address, zip code, product type, manufactured year, month, day on the box ;
 Marked "up", "moisture" "Handle with care" and other transportation signs, all signs are in line with the provisions of GB 191.
 5.2 Packaging
 Products are separated using special plastic box packaging, with anti-vibration function, and in accordance with the provisions of
 GB 3873.
 5.3 Transport
 packaged products can be shipped by any transportation service, there should be awnings in transport and no excessive vibration,
 impact, etc.
 5.4 Storage
 Products should be stored in compliance with GB 3873.

