Rubber-sheathed cable is a flexible, movable cable featuring multi-stranded fine copper wire conductors with rubber insulation and rubber sheath protection. Our product range includes general rubber-sheathed flexible cables, welding machine cables, submersible motor cables, radio device cables, and photographic light source cables.
| Core Operating Temperature | Not exceeding 65°C |
|---|---|
| Typology | YH (Compound rubber sheath for welding cable) YHF (Neoprene or other synthetic sheathed welding cable) |
| Application | Suitable for welding machines with voltage to ground not greater than 200V DC and pulsating current values of 400V |
| Nominal Cross Sectional Area (mm²) | Quantity/Stranding Diameter (mm) | Nominal Sheath Thickness (mm) | Total Diameter (mm) | Max Conductor Resistance at 20°C (Ω/km) | Reference Weight |
|---|---|---|---|---|---|
| 10 | 322/0.20 | 1.8 | 7.5-9.7 | 1.91 (YH) 1.95 (YHF) |
146 (No armor) 153.51 (Armor) |
| 16 | 513/0.20 | 2 | 9.2-11.5 | 1.16 (YH) 1.19 (YHF) |
218.9 (No armor) 230.44 (Armor) |
| 25 | 798/0.20 | 2 | 10.5-13 | 0.758 (YH) 0.78 (YHF) |
316.6 (No armor) 331.15 (Armor) |
| 35 | 1121/0.20 | 2.2 | 11.5-14.5 | 0.536 (YH) 0.552 (YHF) |
426 (No armor) 439.87 (Armor) |
| 50 | 1596/0.20 | 2.4 | 13.5-17 | 0.198 (YH) 0.204 (YHF) |
790 (No armor) 817.52 (Armor) |
| 70 | 2214/0.20 | 2.6 | 17-22 | 0.161 (YH) 0.164 (YHF) |
1348.25 (No armor) 1392.55 (Armor) |
| 95 | 2297/0.20 | 2.8 | 19-24 | 0.129 (YH) 0.132 (YHF) |
1678.5 (No armor) |
| Rated Voltage (U0/U) | 300/500V; 450/750V |
|---|---|
| Number of Cores | 1, 2, 3, 4, 5, 3 + 1 |
| Nominal Cross-sectional Area (mm²) | 0.3-0.5, 0.75-6, 1.5-6, 1.5-400, 2, 3, 4, 5, 1-95, 1-150, 1-25, 1.5-150 |
| Maximum Conductor Temperature | 60°C |
| Environmental Temperature | YC type: -40°C; YCW type: >-15°C |
| Cable Bending Radius | Not less than 5 times the outside diameter of the cable |
| Application | Designed for drives, household appliances, portable electrical equipment, and power tools with rated voltage of 450/750V |
| Model | JHS; JHSB |
|---|---|
| Rated Voltage | 450/750V; 300/500V |
| Number of Cores | 1, 3, 4, 3 + 1 |
| Nominal Cross-sectional Area (mm²) | 1.5, 2.5, 4, 6, 10, 16, 25, 35, 50, 70 |
| Long-term Working Temperature | Not exceeding 65°C (Not exceeding 85°C for submersible pump power transmission) |
| Application | Transmission of electrical power from submersible taps at AC voltages of 500 volts and below. Suitable for submersible pumps, coal mines, underwater work, underwater landscape lights, and other processing equipment |
| Implementation Standards | Flame retardant and fire resistance test GB12666-90 |
|---|---|
| Rated AC Voltage | U0/U 0.6/1KV; U0/U 450/750V (Silicone rubber control cables) |
| Maximum Working Temperature | 180°C |
| Minimum Ambient Temperature | Silicone rubber sheath: Fixed laying -60°C, Non-fixed laying -20°C |
| Characteristics | Resistant to heat radiation, cold, high temperature, voltage, acid, alkali, corrosive gases, and waterproof |
| Brand | LINKE | Cross Section (mm²) | 0.01-500mm² |
|---|---|---|---|
| Wire Gauge (AWG) | [e.g., 24AWG, 28AWG] | Conductor | Tinned Copper /bare copper, based on client's requirements |
| Insulation material | PVC/TPU/Silicone rubber/PE/PP/XLPE/Nylon/other | Jacket Material | [PVC/PU/Rubber/Braid/etc.] |
| Certifications | RoHS/REACH/UL/CE/IP68/etc | Custom Length | [e.g., 1m, 3ft, 5m ±5% tolerance] |
| Cable Type | [Medical/Power/Audio/Coaxial/Electrical/Automotive/Energy storage//etc.] | Shielding | [Shielded/Unshielded/Braid Shield] |
| Impedance | [e.g., 75Ω (for coaxial cables)] | Printing/Logo | [Text/Label/Logo, max. 20 characters] |
| Bend Radius | [e.g., ≥5× cable diameter] | Current Rating | [e.g., 5A] |
| Voltage Rating | [e.g., 30V AC/DC] | Connector Material | [Gold-plated/Nickel-plated/Brass/etc.] |
| Connectors | [e.g., USB Type-C, 3.5mm Jack, RJ45] | Jacket | XLPE or PE or PVC RUBBER |
| Delivery Time | 7-14 days after confirming the order | Colors | [Black/White/Red/Custom Pantone/etc.] |
| temperature | Minus-70℃to 350℃(-70℃ ~ 350℃) | Package | Roll/box/plate/Custom |
| Supporting Services | custom cable, end to end solutions, including precise cutting, crimping and installation of lugs (specify material,e.g.,copper/nickel plated) | ||
Independent Laboratory • Complete Testing Equipment • Full Quality Control
We test every product by strict standards to ensure superior quality and reliable performance.
| No. | Test Item | Test Condition | Test Requirement | Test Data | Result |
|---|---|---|---|---|---|
| 1 | Structure Inspection | 1. Comply with wire size table 2. Minimum thickness ≥ 80% of average thickness |
Comply with wire size table | Refer to test record | Pass |
| 2 | Thermal Shock | Wind the sample on an iron rod of specified size, place in an aging oven at specified temperature for 1 hour, cool the sample to room temperature for at least 30 minutes, then observe the sample | No cracks on the sample surface | No cracks | Pass |
| 3 | Heat Deformation | 1. Measure sample thickness (mark measurement position) 2. Place sample and test fixture in aging oven for preheating at specified temperature for 1 hour 3. Place sample under pressure column of test fixture for 1 hour 4. Re-measure sample thickness at the same position |
1. Sample shall not be cracked by pressure column or expose conductor 2. Thickness reduction ≤ 50% |
Refer to test record | Pass |
| 4 | FT2 | Apply a standard flame at a height of 125mm once | 1. Flame shall not propagate along its length 2. Flame shall not spread to nearby flammable materials |
Refer to test record | Pass |
| 5 | Aging | 1. Take five sections of 200mm-long sheath 2. Place specimens in aging oven at 158℃ for 168 hours 3. After taking out specimens, place at room temperature 23±5℃ for 16 hours, then test elongation at break and tensile strength |
1. Elongation before aging ≥ 300%, elongation after aging ≥ 80% of that before aging 2. Tensile strength before aging > 1.41kg/mm², tensile strength after aging ≥ 80% of that before aging |
Refer to test record | Pass |
| 6 | Cold Bend | Store sample in low-temperature box at specified temperature for 4 hours, wind sample on iron rod of specified size with specified turns, complete winding within 30 seconds after sample is taken out of low-temperature box | No cracks on the sample surface | No cracks | Pass |
| 7 | Conductor Resistance | Measure resistance of one-meter core conductor with DC resistance meter | At 20℃, resistance of 8AWG ≤ 2.23Ω/km | Refer to test record | Pass |
Linke cable technology (DongGuan) Co. Ltd. concentrate on R&D and
provide professional solutions to the Cable&Wire,especially for the
different industry customers.It contains :
Humanoid robot cable,
AI power cable/data cable,
Semiconductor cable/industrial automatic cable,
Sensor cable,
New energy cable,
Medical beauty wire,
UL wire cable,
Linke Cable has diversified product development capabilities and technical capabilities to support diversified
customer needs. We have obtained the following product authorization:UL 758,CCC,RoHs,REACH,CE; We
have obtained the following quality management system:ISO 9001-2015(All products);ISO 13485
(Medical apparatus and instruments),IATF 16949(Auto industry)
We maintain a strong R&D team with 6 engineering professionals, each possessing over 10 years of technical expertise in wire and cable solutions. Our quality control department employs 10 specialists who strictly supervise every step from incoming materials to shipping, ensuring 100% product quality for our customers. Our production team consists of more than 50 experienced manufacturing professionals.
Our products meet stringent quality standards and industry certifications to ensure reliability and performance in demanding applications.
We are a professional manufacturer with complete control over the production process from beginning to end. We welcome factory visits and provide pickup service in Shenzhen.
Samples are provided free of charge. New clients are expected to cover courier costs.
Our standard MOQ is 100 meters. Due to the weight of cables, we recommend ordering suitable quantities to optimize freight costs, with sea transportation being the most economical option.
Discounts are available based on order quantity. We can offer competitive pricing and freight arrangements for larger orders.
Yes, we offer OEM services including printing your company name and custom quality cards to promote your brand.