








| General System |
| Housing Material: Extruted PC/PMMA according to the UNE-EN ISO 21305-1:2020 standard, UV filter conditional(IK10) |
| Diffuser Material: Extruted PC/PMMA according to the UNE-EN ISO 21305-1:2020 standard, UV filter conditional(IK10) |
| Housing Color: White (RAL9016), Other colors optional |
| Sealing Gaskets: Silicone foam |
| LEDs Thermal Dissipation: Through finless 6063 AL luminaire body, without conductive fluids. Passive convection dissipation ensuring thermal contact with the LED modules through a high-conductivity Lead-free solder paste |
| Anti-condensation: Pressure-balancing valve to ensure moisture release, avoid condensation and maintain the luminaire IP tightness |
| Finish: Electrostatically sprayed and sublimated in the oven. Resistant to corrosion |
| Recommended Mounted Height: 2 - 4 meters |
| Maintenance: End-cap with screw for installation |
| Driver: Constant current, embedded in luminaire, pre-wired |
| Dimming Control: ON-OFF | 1-10V dimming |
| IP (Ingress Protection Rating): IP67 / IP69K |
| IK (Impact Resistance): IK10 |
| Protective Class: Class ⅠⅠ |
| Glow Wire: 850°C (Under 30s) |
| Cable Gland: Piercing Connector for Flat Cable |
| Installation: Ceiling mounted | Suspension | Magnetic Mounted | Rotatable Wall Mounted |
| Smart Function: Microwave Sensor | Emergency |
| Luminary Inner Protective Cover: PMMA 2.5mm |
| Removable Protective Cover Polycarbonate: 2.5 - 3mm |
| Electrical System |
| Through-wiring: H05RNH2-F 2*1.5mm2 | 2*2.5mm2 | 2*6.0mm2 wires through for option |
| Main Voltage: AC/DC24~42V, AC100~240V 50/60Hz, 85-264VDC |
| Power Factor (PF): ≥0.97 |
| Total Harmonic Distortion (THD): <10% |
| Output Type: Non-SELV(non-isolated) |
| Flicker Factor: <1% |
| Stroboscopic Visibility Measure (SVM): <0.4 |
| Perceptibility of Stroboscopic Effects (Pst): <1 |
| Terminal Connection: Piercing Connector for Flat Cable |
| Luminaires Power B10A B16A C10A C16A |
| Module via LSS Circuit Breakers Luminaires Power B10A B16A C10A C16A |
| 15W 94 145 130 210 |
| Photometry System |
| LEDs: SMD2835 (1W) |
|
CCT (Correlated Color Temperature): Single CCT (3000K | 4000K | 5000K | 5700K |6500K) |
| CRI (Color Rendering Index): >80Ra for standard (>90Ra for higher CRI available) |
| Photobiological Safety: RG0 (exempt of risk) |
| EEC (Energy Effciency Class): A++ |
| SDCM (Standard Deviation of Color Matching): <5 (SDCM<3 Optional) |
|
UGR (4H, 8H) : 24.9 (Cross) 23.4 (Longitudinal) |
| Beam Angle: 360° |
| Average Luminaire Useful Lifetime: 72.000 hours (L80B10) |
| Lumen Maintenance at e.o.l. >70% |
| Luminous Efficacy: 140LPW (PROLine) |
| Rated Power: 20W |
| Lumens Delivered @ 5000K, CRl>80 2.100lm |
| Operation Condition |
| Operation Temperature / Humidity: -20~ +60℃ (-4°F ~ 140°F) / 5~85% RH, not condensed |
| Storage Temperature / Humidity: -40~ +80℃ (-40°F ~ 176°F) / 5~85% RH, not condensed |
| Average LED Useful Time L90B10: ≥0.96 |
| Rated Nominal Lifetime (Tp <70℃): Up to 100,000H |
| Driver MTBF: 500.000H,MIL-HDBK-217F(25℃) |
| Vibration Resistant: 10~500Hz,5G 12min / 1cycle,period for 72min. Each along X,Y,Z axes |
| Acoustic Noise: <25dB (30cm disstance, Normal operation) |
| Guarantee: 3 Years (Extensible up to 5 years) |
| Certifications |
| Global Certificate: ENEC | CE | RoHS | D-mark | KEMA-KEUR Listed, SAA | C-Tick | RCM | CB | ETL/CETL | DLC Premium |
| Security Directives: EN 60598-1 | EN 60598-2-3 | EN 62493 | IEC 62471 |
| EMC Directives: EN 55015 | EN 61547 | EN 61000-3-2 | EN 61000-3-3 | EN 61347-2-13 | EN 61347-1 | EN 62384 |
| Other Directives: IEC 62262 | EN 13032-4 | EN 62717 | EN 6272-1 | EN6272-2-1 | EN 61643-11 |



















* Reliable brand: Built up stable and long-term cooperation with Europe customers, got high prise and trust, and have warehouse in Netherlands for better service;
* Provide DIALux simulation: Send us your parameters of the applications, like distance, height, width, etc, our engineer team will do simulation according to your demand and recommend you the best product;
* All our LED luminaries comply with CE, RoHS standard. TUV, ENEC, VDE, SAA,C-Tick, LM79,LM80 listed for the leading products.






Shipment:

Note: For small order,express will be best.And for bulk order,ship by sea or train(Europe destination) is the best,but take much time.For urgent orders,we suggest via air to airport plus our ship partner send to your door.
Q1: What is the warranty for the TB7 LED Tubular light?









Thank you for your using DUALRAYS LED luminaires, we regards quality first as our marketing philosophy from the design and package of all our products,we here declare that all of our products are tested by professionals and obey strict quality standards,we have professional after-sale service team to follow our customers,we promise that when you find any quality problems caused by the products quality itself within its guarantee period,you can contact us freely. When confirmed by the QC Department, we will immediately help you to exchange or maintain products for free.Shenzhen Dualrays Optoelectronics Co., LIMITED. will serve you with heart and soul!