Voltage:12VAC Load:<350W RGB LED lamps
  Signal coverage over 60 maters.(<100m)
  All our LED pool lights can work with this controller.     IMPORTANT: This manual includes essential information on the safety
    measures to be implemented for installation and start-up. Therefore, the
    installer, as well as the user, must read these instructions before beginning
    installation and start-up. To achieve optimum performance, follow the
    instructions indicated below:
     
      2. INSTALLATION:
    Prior to commencing, make sure there is no electricity passing through the
    wires and cables to be connected. Mount the controller on a solid and
    secure wall at a minimum distance of 5 meters from any water source or
    pipes. Open the controller cover, connect the 12V AC input voltage into the
    terminals clearly marked as 12V AC INPUT. Connect the lamps parallel to
    the terminals clearly marked as LAMPS 12VAC. It is essential to make sure
    the connections are as tight as possible in order to avoid sparking.
    Installation diagram:
  
  
       
    
    
    

    6W 7W 8W 10W 15W 18W 24W 35W 42W 12V 24V AC DC remote control switch control phone wifi control 2 wires 4 wires external control tuya control music RGB RGBW cool white cold white warm white Natural White blue green purple yellow high brightness dimmable SMD2835 cree leds fully resin filled ecopoxy glue plastic 316L stainless steel 304 China supplier Chinese pool light factory made in china led pool light pool lighting pool lights underwater lamp pool design pool builders underwater light water light shenzhen refined tech pool light swimming pool swimming pools pool service pool dealer pool services piscina piscine led underwater light iluminación de la piscina illuminazione della piscina éclairage de piscine Poolbeleuchtung iluminação da piscina