Accessory SMD LED GASKET PCB Heat Sink Or Module For T3M Beam Angle LED Street Light Lens For Flood Lights

• SMD LED: A surface-mount device LED, often used in high-density lighting applications due to their small size and efficiency.
• Gasket: A seal or packing used to create a watertight or airtight joint between two components. In LED applications, gaskets are commonly used to prevent moisture from entering the fixture and damaging the electronics.
• PCB (Printed Circuit Board): A rigid board that serves as the foundation for electronic components. It provides a mechanical support and electrical connections for the LEDs and other components.
• Heat Sink: A component designed to dissipate heat generated by the LEDs. This is crucial for maintaining optimal LED performance and lifespan.
• Module: A pre-assembled unit containing multiple LEDs, a PCB, and sometimes a heat sink. Modules simplify the design and assembly of lighting fixtures.

Quick detail

Description

Accessory SMD LED GASKET PCB Heat Sink Or Module For T3M Beam Angle LED Street Light Lens For Flood Lights

• Long Lifespan: Proper heat management and protective measures can significantly extend the lifespan of the LEDs.
• Efficiency: SMD LEDs are highly efficient, converting a larger portion of electrical energy into light.
• Customizable Beam Patterns: By selecting the appropriate LEDs, lenses, and reflectors, it is possible to create custom beam patterns to meet specific lighting requirements.
• These components work together to create a high-performance and durable lighting solution.
• Complete light distribution, can meet the different needs of customers.

Specifications

Shipping and Delivery:

IES

Drawing

Notices:

• Storage: Do not store in dusty place, or expose under corrosive environment.
• Contact: Do not touch the lens surface with bare-hand. Please use gloves to
• touch the lenses.
• Cleaning: Clean lenses only if necessary. Use only mild soap, water and
• soft cloth.Do not use any commercial cleaning solvents.

FAQ

1) Can I have a sample order?

A: Yes, we welcome sample order to test and check quality.

Mixed samples are acceptable.

2) When can I get the quotation?

A: We usually give you an offer within 12 hours after we get your inquiry. But if you want to get the offer ASAP,please call us or email us that we can reply to you in time.

3) What is the lead time?

A:Sample needs about 3-5 days prepared; mass production time needs 7-10 days normally.

4) What are your main products?

A: Our main products are outdoor lenses and indoor lenses .such as:Street &AREA Light lens ,Single lenses,High Bay Light ,ect.