0.60mm Height 0603 Package UV Chip LED 365nm SMD UV LED UV light emitter
DL-PCB0603UVC-UV400.pdf
Features:
- Package in 8mm tape on 7″ diameter reel.
- Compatible with automatic placement equipment.
- Compatible with infrared and vapor phase reflow solder process.
- Mono-color type.
- The product itself will remain within RoHS compliant Version.
Descriptions:
- The PCB0603 SMD LED is much smaller than lead frame type components, thus enable smaller board size, higher packing density, reduced storage space and finally smaller equipment to be obtained.
- Besides, lightweight makes them ideal for miniature applications, etc.
Applications:
- Automotive: Backlighting in dashboard and switch.
- Telecommunication: Indicator and backlighting in telephone and fax.
- Flat backlight for LCD, switch and symbol.
- General use.
Package Dimension:

| Part No. | Chip Material | Lens Color | Source Color |
| DL-PCB0603UVC-UV400 | InGaN | Water Clear | Purple |
Notes:
- All dimensions are in millimeters (inches).
- Tolerance is ± 0.10 mm (.004″) unless otherwise specified.
- Specifications are subject to change without notice.
Absolute Maximum Ratings at Ta=25℃
| Parameters | Symbol | Max. | Unit |
| Power Dissipation | PD | 95 | mW |
| Peak Forward Current (1/10 Duty Cycle, 0.1ms Pulse Width) | IFP | 100 | mA |
| Forward Current | IF | 25 | mA |
| Reverse Voltage | VR | 5 | V |
| Electrostatic Discharge (HBM) | ESD | 1000 | V |
| Operating Temperature Range | Topr | -40℃ to +80℃ |
| Storage Temperature Range | Tstg | -40℃ to +85℃ |
| Soldering Temperature | Tsld | 260℃ for 5 Seconds |
Electrical Optical Characteristics at Ta=25℃
| Parameters | Symbol | Min. | Typ. | Max. | Unit | Test Condition |
| Luminous Intensity * | IV | 10 | 20 | --- | mcd | IF=20mA (Note 1) |
| Radiant Flux | mW | 15 | 30 | --- | | IF=20mA |
| Viewing Angle * | 2θ1/2 | --- | 120 | --- | Deg | IF=20mA (Note 2) |
| Peak Emission Wavelength | λp | --- | 395 | --- | nm | IF=20mA |
| Dominant Wavelength | λd | --- | 400 | --- | nm | IF=20mA (Note 3) |
| Spectral Line Half-Width | △λ | --- | 10 | --- | nm | IF=20mA |
| Forward Voltage | VF | 3.00 | 3.30 | 4.00 | V | IF=20mA |
| Reverse Current | IR | --- | --- | 10 | µA | VR=5V |
Notes:
- Luminous Intensity Measurement allowance is ± 10%.
- θ1/2 is the off-axis angle at which the luminous intensity is half the axial luminous intensity.
- The dominant wavelength (λd) is derived from the CIE chromaticity diagram and represents the single wavelength which defines the color of the device.
Choose DOUBLE LIGHT, your expert LED components nearby!
Adcantage:
- Over 10 years work experience technical service team
- Manufacturer direct sale,high quality product and competitive price
- Mix order accepted and free sample
- Make double check strictly and packing carefully.
- We will refund you in case of bad quality issue happens due to our product itself.
