Wall Mounted Rotary Panel
Constant Voltage Dimming Controller & RF 2.4G Remote
Technical Parameters
  ● Input voltage: 5-24VDC
  ● Output type: PWM constant voltage+RF(2.4G)
  ● Output current: 2CH, 5A/CH
  ● Output power: 50-240W
  ● Grey levels: 4096/CH
  ● Dimming range: 0-100%
  ● Remote distance: 30m
  ● Working temperature: -30℃~55℃
  ● Product size: L86×W86×H50mm
  ● Net weight: 110g
  
  Summary
  ● Rotary panel dimming PWM constant voltage controller,can also used as RF dimming remoter.
  ● Rotate knob to change brightness, support push,long push operation.
  ● Smooth dimming and switching without any flickering.
  ● Adopt 2.4GHz wireless technology, when used as controller,can accept up to 10 remoter control. when used as remoter,can remote control multiple dimming controller.
  ● Can work with WiFi-relay controller after install APP on IOS and Android system.
  ● Work with power repeater to expand output unlimitedly.


Installation diagram
1. Remove the knob, then flip panel, inserted into the card edge aperture with a small screwdriver, gently pry and open the panel.

NOTES:
● In order to ensure safety, turn off the power first before wiring, ensure correct wiring to avoid short circuit.
● In the process of installation, don't push the knob hardly, so as not to loose knob spindle and scratch panel.
