Outdoor Solar Powered Street Lamp LED Light with Motion and Remote Sensor Optional

Introduction to the Safety of Solar Street Lights

When installing and using the 9th-generation solar street light, it is essential to adhere to the following safety guidelines to ensure the safety of both the user and the equipment.​
Before installing the light fixture, carefully check that the lamp and all its accessories are in good condition and have been received intact. If any part is missing or damaged, do not attempt to assemble, install, or operate the light fixture, as this may lead to safety hazards or equipment failure.​
Never use AC power to power the solar lamp, as this will damage the internal components of the light and may cause safety issues such as short circuits or fires.​

When the light fixture is in use, do not cover it with any combustible materials. Covering the light can cause it to overheat, which may ignite the combustible materials and result in a fire.​
The light fixture may become hot during operation. Therefore, do not touch the light fixture before it has cooled down to avoid burns.​
This device complies with the FCC Rules, ensuring that it meets the relevant electromagnetic compatibility standards and does not cause interference to other electronic devices.​
During installation, make sure that the light is fixed firmly to the pole. A loosely installed light may fall off, posing a risk of injury to people or damage to property below.​
Do not disassemble the lamp under any circumstances. Disassembling the lamp will not only void the warranty but also may expose you to dangerous components and cause damage to the light that cannot be repaired.​
To maintain the charging efficiency of the solar panel, clean the dust on its surface every 3 months. Accumulated dust will block sunlight, reducing the amount of energy absorbed by the solar panel and affecting the performance of the light.​
In conclusion, the 9th-generation solar street light is a reliable, efficient, and environmentally friendly lighting solution. With its advanced features, easy installation, and comprehensive safety guidelines, it is an ideal choice for a wide range of outdoor lighting applications, contributing to a more sustainable and energy-efficient future.​

Installation of solar street lights

The installation process of the 9th-generation solar street light is relatively straightforward. First, insert the solar light into the prepared lamp post. Then, use the provided rotating screws to fix the light firmly to the pole, ensuring it is stable and does not wobble. Once the light is securely mounted, press the switch to turn it on and verify that it is working correctly. It is important to follow the installation instructions carefully to ensure the safety and proper functioning of the light.