Specifications:
1.Display Mode: FSTN/Transflective/Negative
2.Viewing Angle: 6 0'clock.
3.Drive Method:1/64 Duty,1/7Bias
4.Top: -10°C~+60°C
Tst: -20°C~+70°C.
5. Connector: COG+FPC.
6. Drive IC: ST7567
Equipment status display
Instrumentation panels
2.Consumer Electronics
Portable device displays
Home appliance interfaces
3.Medical Devices
Portable medical instruments
Basic diagnostic devices
Shared device lock screens
In-vehicle information terminals
5.Retail & Payment
POS systems
Electronic shelf labels
6.Communication Devices
Walkie-talkie status screens
Network equipment indicators
FAQ
1.Can small-sized LCD screens be equipped with touch functions?
Yes. This is a very common requirement. The touch panel is typically laminated onto the surface of the LCD. Main types:
Resistive Touch: Low cost, resistant to surface contaminants (dust, water), works with any object. Lower transmittance, relatively less durable (scratches), usually no multi-touch.
Capacitive Touch: High transmittance, sensitive and smooth touch, supports multi-touch, durable (glass surface). Higher cost, requires finger or special stylus, sensitive to water/oil on surface.
2.How long is the lifespan of a small-sized LCD screen?
Lifetime primarily refers to the Backlight lifespan (usually measured in hours until brightness drops to 50% of initial) and the reliability of the LCD Panel itself.
Backlight Lifetime: Common LED backlights typically last 30,000 to 70,000 hours (approx. 3.5 to 8 years of continuous use). High temperatures significantly reduce this.
LCD Panel Lifetime: Generally very long, often 50,000 hours or more under normal operating conditions (avoiding physical shock, extreme temperatures, excessive humidity). The screen itself typically does not suffer from "burn-in".
3.How long does it usually take for a sample?
Samples usually take 3 to 5 days to be dispatched
4.How long is the delivery cycle generally?
The delivery time is within 20 to 30 days