MachineU > China Products > Tools & Hardware > Fasteners > Clamps & Clips > Wire Rope Clips
4 mm Double Wire Wooden Box Clips - Drawing and Joint-Fit Selection
4 mm Double Wire Wooden Box Clips - Drawing and Joint-Fit Selection
4 mm Double Wire Wooden Box Clips - Drawing and Joint-Fit Selection
4 mm Double Wire Wooden Box Clips - Drawing and Joint-Fit Selection
4 mm Double Wire Wooden Box Clips - Drawing and Joint-Fit Selection
4 mm Double Wire Wooden Box Clips - Drawing and Joint-Fit Selection
Specifications
Brand Name :
ORIENS
Drawing dimensions / wire diameter :
116 x 89 mm / 4 mm
Place of Origin :
China
MOQ :
500 pieces
Description
4 mm Double Wire Wooden Box Clips - Drawing and Joint-Fit Selection
For engineering-led purchasing, the complete drawing is the starting point. This ORIENS double wire wooden box clip is identified by the supplied 116 x 89 mm profile dimensions and a 4 mm wire diameter. Use the drawing to discuss fit, rather than treating a photograph as a dimensional specification.
Read the Dimensions by Feature
Drawing information How to use it
116 mm and 89 mm Compare the dimensions at the reference locations shown on the drawing
4 mm wire diameter Identify the round wire section; do not describe it as sheet thickness
Formed gripping ends Compare their orientation with the engagement surfaces of the crate
Local dimensions and bends Review the full profile, rather than substituting an assumed panel thickness
Keep Clip Dimensions and Wood Dimensions Separate
The wooden panel thickness, cleat width, cleat thickness and corner layout belong to the crate drawing. They are not automatically established by the clip's outline dimensions. Send both drawings together so the interfaces can be reviewed.
A Practical Drawing-Review Sequence
  1. Identify the required clip drawing and revision.
  2. Check that millimetre and inch annotations describe the same feature.
  3. Compare the wire diameter and gripping-end geometry with the reference sample.
  4. Show the intended installed position on the wooden joint.
  5. Agree the sample review and acceptance points before committing to the production specification.
If your existing sketch uses different reference points, explain where each measurement starts and ends. Different numbers on two sketches do not by themselves prove that they represent different clip models.
Send a Complete Technical Inquiry
Include the drawing, joint details, required material and finish, quantity and destination. The minimum order quantity is 500 pieces. No tolerance, panel-thickness range or load rating should be inferred from this listing.
Email sales@oriensmetal.com. See the main 116 x 89 mm specification page and other crate clip designs.
Dimensioned Clip Drawing
4 mm Double Wire Wooden Box Clips - Drawing and Joint-Fit Selection 4 mm Double Wire Wooden Box Clips - Drawing and Joint-Fit Selection
Send your message to this supplier
Send Now

4 mm Double Wire Wooden Box Clips - Drawing and Joint-Fit Selection

Ask Latest Price
Watch Video
Product Detail
Brand Name :
ORIENS
Drawing dimensions / wire diameter :
116 x 89 mm / 4 mm
Place of Origin :
China
MOQ :
500 pieces
Contact Supplier
video
4 mm Double Wire Wooden Box Clips - Drawing and Joint-Fit Selection
4 mm Double Wire Wooden Box Clips - Drawing and Joint-Fit Selection
4 mm Double Wire Wooden Box Clips - Drawing and Joint-Fit Selection

Beijing Oriens Technology Co., Ltd.

Verified Supplier
3 Years
beijing, beijing
Since 2009
Business Type :
Manufacturer, Exporter, Trading Company, Seller
Main Products :
Metal Stamping Parts, Crate Clip, Laser Cut Metal Parts
Total Annual :
5000000-8000000
Employee Number :
40~50
Certification Level :
Verified Supplier
Discover similar products
View More

Find Similar Products By Category:

Supplier Homepage Products Crate Clip
MachineU China Products Tools & Hardware Fasteners Clamps & Clips Wire Rope Clips
Contact Supplier
Submit Requirement