High-performance DLP laser projector designed for professional applications including digital 3D mapping and large venue presentations.
| Main Spec | Details |
|---|---|
| Projector Type | DLP® Chip × 1, DLP Display |
| Chip Size | 0.67" |
| Native Resolution | 1920 × 1200 |
| Brightness | 15,000 Lumens |
| Uniformity | 90% |
| Contrast | 12000:1 |
| Aspect Ratio | 16:10 Native / 4:3 Compatible |
| Light Source Type | RgBL Laser Technology |
| Light Source Life | Standard: 20,000 hours / Eco Mode: 25,000 hours |
| Projector Lens Options | A06: 1.22-1.53:1 (STD) / A13: 2.90-5.50:1 / A1: 0.57:1 |
| Throw Ratio | 0.36 - 5.50 |
| Keystone Correction | H: ±20° / V: ±20° |
| Projection Method | Ceiling, Front, Rear |
| Input Connections | DVI-D × 1, HDMI 1.4 (HDCP) × 1, 15-pin Mini-Dsub × 1, HDBaseT × 1, Wired Remote 3.5mm, RJ45 (LAN Control), RS232 (D-sub 9pin), miniUSB, USB-A |
| Output Connections | 15-pin Mini-Dsub × 1, HDMI 1.4 (HDCP) OUT × 1, 3D-Sync × 1 |
| Input Power | 100-240V AC ±10%, 50/60Hz |
| Power Consumption | Normal: 770W, ECO: 395W |
| Case Material | Molded Plastic |
| Standby Power Consumption | < 0.5W |
| Dimensions | 484mm (W) × 519mm (D) × 181mm (H) |
| Net Weight | Approximately 25kg |
| Noise Level | Normal: 35dB, ECO: 33dB |
| Working Temperature | High Altitude: 0m-2500m (>1500m Using High Altitude Mode) |
| Operating Conditions | Temperature: 5-40℃, Humidity: 10%-85% |
1. The optical output data value is measured at the center of the projected image. The measurement method is based on the international standard ISO/IEC 21118:2012, and the data values are averages.
2. ISO21118 standard, the data value is the average value.
3. HDCP (High Bandwidth Digital Content Protection).
4. HDBaseT connectivity.
5. If using the projector at high altitude where ambient temperature exceeds 35 degrees Celsius, the service life of optics may be reduced. It is advisable to keep the temperature as low as possible.