Water Based Paint paint more Odor-free and eco-friendly no irritating odor strong adhesion

Product Introduction

This product is a high-quality water-based environmentally friendly interior wall paint, made of organic modified inorganic mineral gelling materials, environmentally friendly additives and other raw materials, refined by advanced technology. The product has the characteristics of health and environmental protection, excellent hiding power, strong adhesion and excellent construction performance.

Main ingredients:

Organic modified inorganic mineral gelling materials, titanium dioxide, environmentally friendly additives, deionized water, etc.

Product characteristics

1. Odor-free and environmentally friendly
2. Excellent hiding power
3. Strong adhesion
4. Simple construction

Product use

Applicable to wall decoration in public areas of various types of buildings such as general residences, apartments, office buildings, hospitals, schools, factories, municipal public buildings, etc.

Technical parameters

Theoretical dosage: about 3-3.5㎡/1kg/2 times depending on the specific process, the actual construction area will vary due to different personal construction techniques and processes.

Dilution ratio: depending on the specific construction situation, it can be diluted with no more than 10% of clean water.
 Drying time: about 2 hours for surface drying; recoating time is at least 2 hours (25℃, 50% relative humidity), which can be extended moderately at low temperature.
 Maintenance time: 7 days/25℃, which can be extended at low temperature (not less than 5℃) to obtain ideal coating effect.
 Implementation standards: GB18582-2020 "Limits of Hazardous Substances in Wall Coatings for Buildings", GB/T9756-2018 "Synthetic Resin Emulsion Interior Wall Coatings" qualified products.
 Product specifications: 20KG/barrel.
 Shelf life: see product label.

Usage method

 Construction method: rolling, spraying, brushing, etc.
 Construction tools: material tray, palette knife, masking paper, short-hair roller, brush, water-based spray gun, etc.
Construction process: ①On the putty layer, roll-coat one coat of anti-alkali sealing primer and wait until it is completely dry;
②Roll-coat the first coat of Duoduo water-based diatom paint and wait until it is completely dry;
During construction, the corners of the wall must be painted first. When the corners are not completely dry, a large area of rolling is carried out. It is advisable to apply the slurry evenly to the wall from the upper part to the lower part of the wall, from left to right, from inside to outside, from easy to difficult, and use a roller or spray gun to apply the slurry evenly to the wall. The force should be uniform and no coating should be missed; the brushing speed should be consistent and the force should be uniform to ensure uniform coating. When rolling, it is strictly forbidden to squeeze the roller when the roller does not absorb much material; when brushing, the number of back and forth brushing should not be too many to prevent bubbling or leaving brush marks; normal rolling construction must be rolled and collected at the same time. When recycling, the roller must be collected in the same direction, and it is strictly forbidden to roll back and forth; rollers without dead angles should be selected for rolling. Try to stay close to the edge during construction; special areas such as yin and yang corners, skirtings, and gypsum ceilings can be repaired with brushes for details.
③ Apply the second coat of water-based diatom paint with a roller.
Construction environment: It is not suitable to construct when the temperature is below 5℃ or the relative humidity is above 80%.
Base treatment: Before construction, clean the surface of the base to be painted to ensure that the construction surface is clean, free of grease, floating dust, mold algae and other attachments; the construction surface must be flat and dry, without hollows, holes, protrusions, etc.; new base surfaces such as ash sand, plaster, cement, etc. (pH value is less than 10, moisture content is less than 10%) should be dried before construction.
During construction, please configure necessary protective and labor protection supplies such as protective glasses, gloves and professional construction clothes according to local operating specifications.
Before construction, stir well and use in a certain proportion. The preparation container must be clean and free of other chemical substances.
Please use clean water to clean the equipment in time during and after construction.

Precautions

If the product leaks, it can be covered with sand or soil for absorption.
 For the treatment of pollutants after absorption, including cans and unused containers, they should be handled in accordance with local environmental protection standards.
 Never discharge discarded paint waste into drains or water sources.
 If you accidentally get into your eyes while using this product, please rinse with clean water in time. If you feel uncomfortable, please seek medical attention in time.
 In order to better protect the legitimate rights and interests of users, please do not purchase products with incomplete labels and beware of counterfeiting.
 For any unclear points, please ask the local dealer for the product manual.