Real-time Flow Monitor High-temperature Combustion Oxidation Total Organic Carbon Analyzer TOC Tester Water Organic C Detector
Product Introduction
The LR-Z245 utilizes the high-temperature catalytic combustion oxidation method. The sample and a purified carrier gas (high-purity oxygen) are introduced into high-temperature combustion and low-temperature reaction tubes, respectively. In the high-temperature combustion tube, the sample undergoes catalytic oxidation, converting both organic and inorganic carbon into carbon dioxide. In the low-temperature reaction tube, the sample is acidified, causing inorganic carbon to decompose into carbon dioxide. The CO₂ generated in both tubes is transported by the carrier gas sequentially into a Non-Dispersive Infrared (NDIR) detector for measurement. This allows for the separate determination of Total Carbon (TC) and Inorganic Carbon (IC) in the water. Total Organic Carbon (TOC) is calculated as the difference between TC and IC (i.e., TOC = TC - IC).
Application Areas
Determination of Total Organic Carbon (TOC) in surface water, groundwater, domestic sewage, and industrial wastewater; applicable to sectors such as environmental monitoring, municipal water supply and drainage, disease control, chemical engineering, and electric power.
Operating and Installation Environment Requirements
1. Power Supply: AC 220V ±10%, 50/60Hz (reliable grounding required)
2. Power Consumption: 1000W during furnace heating
3. Ambient Temperature: 0–40°C
4. Relative Humidity: 10–85%
5. Installation Location: Indoor
6. Gas Source: High-purity oxygen (≥99.999%)
7. High-Purity Water: CO₂-free water (TOC ≤0.5 mg/L)
8. Acid Reagent: 10% phosphoric acid
9. Instrument Placement: Maintain a 20 cm clearance around the unit for heat dissipation; do not stack items on top
10. Combustion Temperature: 680°C–1200°C