Computerized Asphalt Softening Point Test Machine Petroleum Asphalt Softening Point Tester Bitumen Soften Point Test Instrument
Product Introduction
This instrument is used to determine the failure strain and failure stress of asphalt. It is applicable to undisturbed asphalt, asphalt after rotating thin film oven testing (RTF 0℃), and asphalt after pressure aging in a pressure aging vessel (PAV). The equipment meets standards such as ASTM D 6648, AASH TO T13143-09, and JTG E20 T 0627-2011.
Computerized Asphalt Softening Point Test Machine Petroleum Asphalt Softening Point Tester Bitumen Soften Point Test Instrument
Technical Specification
|
Voltage/Frequency |
220V±10%, 50Hz |
|
Operating Environment |
Room temperature less than 35℃; no direct sunlight |
|
Measurement Range |
5-80℃ (water-based); 80-180℃ (glycerin-based) |
|
Minimum Temperature Division |
0.1℃ |
|
Minimum Time Division |
1S |
|
Display Mode |
Dual four-digit digital display |
|
Steel Ball |
Φ9.53mm, G=3.5±0.05g |
|
Flat-bottomed Insulated Dish |
Glassware, capacity not less than 1L, depth not less than 120mm, diameter not less than 86mm |
|
Stirrer |
Continuously adjustable stirring speed |
|
Heating Rate |
Automatically adjusts to 5.0±0.5℃/min after three minutes of startup |
|
Heating Power |
≤800W |

