500ml FEP Scrubber Bottles Acid and alkali resistant bottles customizable

Advantages of FEP Scrubber Bottles

1. The appearance is transparent and colorless, and the refractive index is low in plastics; during the gas cleaning process, the specific gas cleaning conditions of the samples in the bottle can be well observed;

2. The filter ball is made of high-purity experimental grade polytetrafluoroethylene. The diameter of the micropores on the filter ball is small and the number is large, which ensures that the gas washed through the filter ball can meet the cleaning standard;

3. Good recoverability: For vacuum or negative pressure experiments, FEP bottles can also be used, but the negative pressure may cause the bottle body to suffocate during the experiment, but it will quickly return to its original state without affecting secondary use;

4. Low dissolution and precipitation, and metal impurity content is lower than 0.01PPb value;

5. It is chemically resistant and can withstand all chemical solvents (aqua regia, hydrofluoric acid, sulfuric acid, magic acid, acetone, alcohols, etc.)

The Scrubber Bottles is an instrument for washing out impurities in the gas. It is to bubbling and absorb the impure gas through the selected suitable liquid medium (dissolving or due to chemical reaction), so as to wash away the impurity gas, so as to achieve the purpose of purifying the gas. . In the experimental device with a flammable gas source, the gas washing bottle can also play the role of a safety bottle.

The gas scrubber contains selected liquids to scrub the gas and remove moisture or other gas impurities. When using, pay attention to the flow direction of the gas, and the inlet pipe and the outlet pipe cannot be reversed. The gas washing bottle cannot hold alkaline liquid detergent for a long time. After use, pour the detergent into a reagent bottle with a rubber stopper and store it for later use, and clean it with water and place it. The bottle can also collect gas and calculate the volume of gas. In general, long tubes go in and short tubes go out. Longer conduits feed gases with a density greater than air, and short conduits feed gases with a density less than air.