KSD9700 series thermal protector range of applications
● Ballast
● fluorescent
● Motor
● Transformers
● laminator
● Rechargeable battery
● Solenoid
● Appliances
● PCB board

KSD9700 series thermal protector works
KSD9700 series is a double metal as the temperature sensing thermostat,Electrical work, the double-metal free state,Contact is closed / disconnected state, when the temperature rises to action temperature, the bimetallic element to heat stress and rapidly generate action Open / close contact, off / on the circuit, and thus play a role in thermal protection. When getting down to re-set temperature is the degree of contact auto open / close, return to normal working condition.

KSD9700 series thermal protector product advantages
● Small size, easy to install
● Snap-action bimetal, fast response
● life of up to 10,000 times
● anti-vacuum impregnation process
● Alternative SENSATA 17AM 7AM, South Korea, SEK ST-22 and other foreign products

KSD9700 series thermal protector Specifications
● Contact form: normally open, normally closed
● contact capacity (15A/12VDC 12A/24VDC 10A/120VAC 8A/250VAC)
● normal contact resistance ≤ 50mΩ
● Insulation resistance ≥ 100mΩ

Operate or reset the control table

KSD9700 series thermal protector Notes
●using contact temperature-type installation,should be The product snapping charged with apparatus mounting surface.
● installation of plastic or metal can not be collapsed or distort, so as not to affect performance.
● Metal products with added insulation jacket of the installation can not be removed without the external insulating sleeve or crushed, to avoid leakage, ensure safe use.
● product is not greater than 5A current in the circuit, should be selected cross-section of 0.4-0.75 mm 2 copper wire connected to it.
● product should be less than 90% relative humidity, ambient temperature below 40 ℃ ventilation, clean, dry, non-corrosive gas in storage.