The QMX3.P74-1BSC is the black-finish variant of the QMX3 triple-sensor room operator, designed to measure temperature, relative humidity, and CO2 concentration via KNX protocol. The CO2 sensor covers a range of 400 to 10,000 ppm, enabling demand-controlled ventilation integrated through the KNX backbone.
Temperature control utilizes PWM or PID modulating algorithms for pure heating, pure cooling, or combined HVAC modes. Three independently configured thresholds trigger fan speed changes and valve positioning signals for comprehensive indoor air quality automation in any occupied zone. Setpoints can be adjusted via KNX bus commands or the touchkey panel interface.
| Protocol | KNX (PL-Link and S-Mode) |
| Voltage Supply | KNX bus |
| Sensors | NTC temperature, CO2, relative humidity |
| Temperature Range | 0...50 °C |
| CO2 Range | 400...10,000 ppm |
| Display | Segmented backlit LCD |
| Fan Stages | 1, 2, or 3-speed |
| Positioning Signal | 1, 2, or 3-point |
| Setpoint Adjustment | Via KNX bus or display |
| Communication | KNX PL-Link, KNX S-Mode |
| Degree of Protection | IP30 |
| Dimensions (W x H x D) | 88.4 x 133.4 x 18 mm |
| Warranty | 24 Months |