MEASTEK MDP4300C High-Voltage Differential Probe, 200 MHz,3000V of common mode voltage
Key Features:
1. Military-grade durability design
* Buttonless integrated body: eliminate mechanical failure points and increase life by 3 times
* IP54 protection: dust and splash proof, suitable for harsh industrial environments
* Overload red light warning: >3000Vpk automatic alarm to prevent damage caused by misoperation.
2. Plug and play full compatibility
* Standard BNC interface: compatible with all brands of oscilloscopes such as Keysight/TEK/Dingyang/Puyuan.
3. Intelligent functions improve efficiency
* Automatic save function: real-time storage of waveform data, no loss when power is off
* Dual delay compensation: 9ns+1m cable 5ns on the host side, support for multi-channel synchronous analysis
* Low noise design: <600mv Vrms noise floor, small signals are clearly visible
Specifications
| Model | 
 MDP4300C  | 
| Bandwidth (-3dB) | 
 200 MHz  | 
| Rise time (ns) | 
 ≤1.75  | 
| Accuracy | 
 1%  | 
| Attenuation ratio | 
 1000X  | 
| Maximum differential measurement voltage (DC+Peak AC) | 
 ±3000Vpk  | 
| RMS | 
 ±2120Vrms  | 
| Maximum input voltage to ground (Vrms) | 
 600V CATII 1000V CATI  | 
| Common mode voltage(DC+Peak AC) | 
 ±3000Vpk  | 
| Input Impedance | Single-ended to ground 5MΩ | 
| Two input terminals 10MΩ | |
| Input Capacitance | Single-ended to ground <4pF | 
| Two input ends <2pF | |
| 
 CMRR  | 
DC >80dB | 
| 100kHz>60dB | |
| 1MHz>50dB | |
| Noise (Vrms) | <600mV | 
| Delay time | Host: about 9ns | 
| BNC cable 1m: about 5ns | |
| Overload indicator voltage threshold | >3000Vpk | 
| Overload indicator light (red light) | Yes | 
| Auto-save function | Yes | 
| Terminal load requirement | ≥100kΩ | 
| power supply | USB 5V/1A adapter | 
Applications
| Floating voltage measurement | Power battery failure analysis | 
| Inverter | Switching power supply design | 
| Welding, electroplating power supply | Induction heating, induction cooker | 
| Motor drive design | Electronic ballast design | 
| Electrical experiment | Inverter, UPS power supply | 
| Frequency conversion appliances | Power conversion and other related designs | 
| Low voltage electrical appliance test | Power electronics and power transmission experiment, etc. | 
| igh and medium voltage inverters (inverters) | Efficiency evaluation of wireless power transmission systems (WPT) | 
Packing List
| Name | Quantity | 
| High-voltage differential probe | 1 piece | 
| Test hook | 1 pair | 
| Input extension cable | 1 pair | 
| BNC output cable | 1 piece | 
| Power output cable | 1 piece | 
| Power adapter | 1 piece | 
| Test report | 1 piece | 
| Warranty card | 1 piece | 
| Probe box | 1 piece |