Container Energy Storage System 1.106MWh Remote EMS Monitoring Industrial Power Storage
IP54 container energy storage system 500kW/1.106MWh high voltage ESS with intelligent air cooling & full BMS, wide temperature range -30℃~55℃, scalable for commercial, industrial, solar grid energy storage projects.
Product Overview
Our ESSC0500A-1106 containerized energy storage system is a standardized outdoor integrated energy storage cabinet built for large-scale renewable energy matching, peak shaving, grid stabilization and backup power supply. Adopting IP54 dustproof & waterproof enclosure, independent air duct intelligent thermal management, complete BMS & EMS communication system, it supports extreme ambient operation and fast turnkey deployment for global energy storage projects.
Technical Specifications (ESSC0500A-1106)
| DC Parameters |
| Battery Capacity |
1.106 MWh |
| Battery Rack Quantity |
8 sets |
| BMS Communication |
RS485 / CAN |
| DC Voltage Range |
600 ~ 850 V |
| AC Parameters |
| Rated AC Power |
500 kW |
| Max AC Power |
550 kW |
| Rated AC Current |
722 A |
| Max AC Current |
800 A |
| DC Current Component |
<0.5% |
| THDi |
<3% (under rated power) |
| Rated Grid Voltage |
400 V |
| Allowable Grid Voltage |
320 ~ 460 V |
| Grid Frequency |
50 / 60 Hz, adjustable range 45~55Hz / 55~65Hz |
| Power Factor |
1 Lagging ~ 1 Leading |
| Isolation Method |
No Isolation |
| General Hardware Data |
| Ingress Protection Grade |
IP54 |
| Fire Extinguishing System |
Supported |
| Full Power Continuous Running Time |
2 Hours |
| Operating Temperature |
-30℃ ~ 55℃ |
| Overall Dimension (W×D×H) |
12192 × 2438 × 2896 mm |
| Total Weight |
3.5 Tons |
| EMS Communication Interface |
RS485, TCP/IP |
| PCS Cooling Mode |
Intelligent Air Cooling with Temperature Control |
| Battery Cooling Mode |
Air Conditioning Cooling |
| Max Working Altitude |
4500m (power derating over 3000m) |
| Relative Humidity |
0 ~ 95% Non-Condensing |
Main Application Scenarios
- Commercial & Industrial Peak Valley Load Shifting - Factory, shopping mall, data center energy storage to cut peak electricity charges, optimize power consumption cost.
- New Energy Matching Storage - PV solar power station, wind farm energy storage, smooth power output fluctuation, improve renewable energy absorption rate.
- Grid Auxiliary Service - Grid frequency modulation, voltage stabilization, power backup to enhance power grid safety and stability.
- Off-Grid & Microgrid Power Supply - Remote mining areas, island, rural microgrid, independent power supply without city grid connection.
- Emergency Backup Power - Hospital, communication base station, logistics park uninterruptible emergency power supply during grid outage.
- Large Energy Storage Power Station - Centralized container energy storage power station for regional energy storage and power dispatching.
Frequently Asked Questions
Q1: What is the protection grade of this container energy storage system?
A: Our ESSC0500A-1106 adopts IP54 standard enclosure, which can effectively block dust, splashing rainwater, suitable for long-term outdoor installation.
Q2: What is the continuous discharge duration at full power?
A: Under rated 500kW full power output, the system can run continuously for 2 hours with 1.106MWh energy capacity.
Q3: Can this energy storage cabinet work in cold high-latitude areas?
A: Yes, the operating temperature range covers -30℃ to 55℃, built-in heating & air conditioning dual cooling system, normal operation in cold alpine regions.
Q4: What communication interfaces does the ESS support for remote monitoring?
A: BMS uses RS485/CAN; EMS remote monitoring supports RS485 and TCP/IP, compatible with most mainstream energy management platforms.
Q5: What is the maximum working altitude of the energy storage system?
A: The maximum applicable altitude is 4500 meters; power derating is required when operating above 3000 meters to guarantee safety.