Product Description
Construction hoistelevatorlift gear rack
Rack and pinion drive test uses a dual- drive host , making carrying capacity increased. Driver installed in the support frame , the rail is equipped with a rack , by rolling on the rack gear , so that the lift up or down .
The rack is also divided straight teeth and helical gear rack rack, respectively paired with spur gears and helical gears;tooth profile rack is linear than involute(on tooth surface is flat),equivalent to the pitch radius of infinite cylindrical gear.
Features:

( 1 ) Since the rack tooth profile is a straight line , so that each point on the tooth profile with the same pressure angle , and equal to the inclination angle of the tooth profile , this angle is called pressure angle , standard value is 20 °.

( 2 ) either with an addendum line parallel with the same pitch on a straight line and modulus .

( 3 ) parallel to the top line and the tooth thickness of the tooth space width of the straight line is called equal dividing line ( neutral) , it is calculated the size of the rack baseline .

production process

Construction hoist gear racks

Advantage:

1.Enhenced frequency converter helps energy saving:Up to 40%;

2.Stepless speed coversion,no impact during start and stop;

3.Small starting current effectively solve the difficulty on start;

4.Less mechanical wear and longer working life;

5.Simple operation & Easy maintenance.

We can also manufacture custom made gear rack , when customers provide us with drawings.
- Spur gear racks- cnc gear rack
- Bevel gear racks (straight teeth / spiral teeth)- cnc gear rack
- Rack and pinion,cnc gear rack
- Helical gear racks (helix gear racks)
-Worm gear racks (worm wheel)
-Screw gear racks
-Internal gear racks
-Ring gear racks
-Hypoid gear racks
-With / without Ground teeth
-With / without Hardened teeth