24.125GHz Microwave Radar Sensor with 4m×2m Wide Detection
Our 24.125GHz Microwave Radar redefines reliability for automatic door and commercial access motion sensing. Equipped with 4m × 2m wide detection and 12-24V universal voltage support, this advanced sensor uses microwave Doppler technology to emit 24.125GHz signals with controlled power density (≤5mW/cm) and radiated power (<20 dBm EIRP), complying with R&TTE and EMC international standards for safe, interference-free operation.
The optimized detection field covers the full access area of most commercial and sliding glass doors, capturing human motion accurately from all entry angles. The 12-24V AC/DC wide voltage range makes this sensor a universal fit for global commercial and industrial applications.
Product Highlights
- 24.125GHz mainstream microwave frequency for stable motion detection (≥5cm/s)
- Wide detection field: 4m(W)×2m(D) at 2.2m mounting height
- Flexible angle adjustment: 0°~90° vertical / -30°~+30° lateral tilt
- Wide voltage supply: 12-24V AC/DC with low power consumption (≤2W)
- IP54 protection & -20℃~+55℃ working temperature for indoor/outdoor semi-enclosed use
- Easy installation & adjustment with compact size, sensitivity potentiometer, and clear LED status prompt
- Reliable output: 1.5s signal hold, 42V AC/DC max contact voltage, 1A resistive current
Technical Specifications
| Parameter |
Specification |
| Technology |
Microwave Doppler Radar |
| Transmitter Frequency |
24.125GHz |
| Transmitter Radiated Power |
<20 dBm EIRP |
| Transmitter Power Density |
≤5mW/cm |
| Maximum Mounting Height |
3m |
| Tilt Angles |
0°~90° vertical; -30°~+30° lateral |
| Detection Field (2.2m mounting) |
4m(W)×2m(D) |
| Detection Mode |
Motion detection |
| Minimum Detectable Speed |
5cm/s (sensor axis) |
| Supply Voltage |
12-24V AC ±10%; 12-24V DC +30% / -10% |
| Mains Frequency |
50-60Hz |
| Power Consumption |
≤2W(VA) |
| Output Mode |
Switch tube output |
| Signal Output Time |
1.5s hold |
| Max Contact Voltage |
42V AC/DC |
| Max Contact Current |
1A (resistive) |
| Max Switching Power |
30W(DC) / 60VA(AC) |
| Working Temperature Range |
-20℃ ~ +55℃ |
| Degree of Protection |
IP54 |
| Norm Conformity |
R&TTE 1999/5/EC; EMC 89/336/EEC |
| Material |
ABS |
| Housing Color |
Black/Silver |
| Dimensions (W×H×D) |
120mm×80mm×50mm |
| Net Weight |
0.215kg |
| Cable Length |
2.2m |
Installation & Adjustment Guide
The sensor's performance is closely related to correct installation and adjustment—simple operation with no professional tools required:
- Mounting Requirements: Avoid vibration positions, neon lamp proximity and sensor occlusion; do not touch internal electronic parts during installation.
- Sensitivity Adjustment: Rotate the sensitivity potentiometer gently and slowly; the sensitivity value determines the size of the detection field.
- Angle Adjustment: Planar antenna lateral angle = detection field position; vertical angle = detection field depth; set microwave module angle to ≥45° for optimal detection.
- Status Check: LED flashes after power-on (normal standby); LED lights up continuously when a moving target is detected.
Troubleshooting Guide
| Fault Phenomenon |
Probable Causes |
Corrective Action |
| Door does not open & LED no light |
Sensor power off |
Check wiring connection and power supply validity |
| Door opens/closes constantly |
Sensor detects door vibration/movement; interference source in detection range |
Fix the sensor firmly; increase tilt angle/reduce sensitivity; remove interference sources |
| Detection distance is too close |
Low sensitivity; microwave module angle <45°; sensor blocked |
Adjust sensitivity potentiometer; set module angle to ≥45°; remove occluding objects |
Application Scenarios
The RD24-4S is a multi-scenario motion detection sensor with high adaptability, primarily applicable to:
- Automatic Door Systems: Sliding doors, swing doors, glass induction doors (commercial buildings, shopping malls, office buildings)
- Security & Monitoring: Perimeter security detection, indoor human motion induction (residential, factory, warehouse)
- Industrial Automation: Conveyor belt motion detection, equipment start/stop induction (light industry production lines)
- Intelligent Building: Smart lighting induction, air conditioning induction (public areas such as corridors and elevators)
Core Technologies
Microwave Doppler Radar Sensor, 24.125GHz Radar Sensor, Automatic Door Motion Detector, Wide Field Detection Sensor, IP54 Motion Sensor