Industrial Horizontal Fluidized Bed Dryer For Food Grain Feed Powder Drying Processing

XF Series Horizontal Fluidized Bed Dryer

Product Overview

The XF series horizontal fluidized bed dryer, also known as fluidized bed dryer, consists of air filter, heater, horizontal fluidized bed mainframe, cyclone separator, bag filter dust collector and high-pressure induced draft fan. Matching dust removal equipment can be configured flexibly according to material characteristics. Cyclone separator can be used alone for materials with large specific gravity such as instant granules; combined cyclone separator and bag filter dust collector with pneumatic feeding and belt conveyor feeding system are equipped for fine powder and small granular materials with low specific gravity.

Granular solid raw materials are fed into the dryer by feeder. Clean hot air after filtration and heating enters the bottom of fluidized bed, contacts with materials through distribution plate to form fluidization state and complete heat & mass transfer. Dry finished materials are discharged from the discharge port. Exhaust gas discharged from the top of the dryer is recycled for powder materials via cyclone separator and bag filter, then exhausted to atmosphere.

Steam, electric and hot blast stove heating modes are all optional based on customer demands. It applies to drying of granular & pelleted materials including pharmaceutical API, tablet granules, TCM granules, plastic resin, citric acid and other powder/granular chemical raw materials; also widely used in food beverage additives, grain deep processing, corn germ, feed and other industries. The maximum particle size of processable material is 6mm, optimal processing particle range is 0.5-3mm. The machine supports fully automatic continuous drying production.

Product Features & Advantages

• Continuous automatic production line, stable uninterrupted drying operation

  
  

• Fast drying speed and low drying temperature, effectively protect material product quality

  
  

• Fully comply with GMP production standards for pharmaceutical manufacturing industry

  
  

• Multiple heating options available: steam heating, electric heating, hot blast stove heating

  
  

• Flexible dust recovery collocation: single cyclone separator, cyclone + bag filter composite dust removal system

  
  

• Two model structures (Model A / Model B) to match different production line layout requirements

  
  

• Complete supporting configuration options: trough mixer, swing granulator, belt conveyor, vibrating screen for integrated production line

  
  

• Wide applicable material range: pharmaceutical, chemical, food, grain, feed raw materials with particle size 0.5~6mm

  
  

• Stable fluidization state, uniform moisture removal, consistent finished product quality

  
  

• Customizable non-standard large-size fluidized bed equipment for large-capacity production demands

Technical Parameters

Note: These parameters are for reference only and may change according to URS.

Different kinds of products are available in our company. We're pleased to receive your inquiry and will reply as soon as possible. We adhere to the principle of "quality first, service first, continuous improvement and innovation to meet the customers" for management and "zero defect, zero complaints" as our quality objective.