Solder Wire Waterproof Power Connector With Male And Female Plug For Led
Main Features :
M19 3 pin push waterproof connector is easy to assemble when you install your lights fixtures or power fixtures, you could fast plug and unplug it , save your time and cost, it could be used for a long time , 5 years at least.
Technical specification :
| Specifications: | |
| Connecting mode: | Push locking waterproof connector |
| Core number: | 3 pin ,4 pin |
| Connector type : | Bulkhead plug connector |
| Connector color: | Black, blue, yellow |
| Waterproof level: | IP67 |
| Cable specification: | 20AWG-12AWG |
| Cable diameter range: | 4.5mm-11mm |
| Contact diameter*No. | Φ1.0-Φ2.4 |
| Rated current (A): | 20A |
| Operating voltage (AC.V.rms): | 500V |
| Withstand voltage (AC.V)1min: | 1500V |
| Main characteristics: |
| Sealed against dust and fluid (IP67) |
| Vibration resistance, impact resistance, stretching resistance |
| Dust cover available |
How to use push locking waterproof connector ?
Just need to rotate it as the arrow show in right direction and pull it, then it could be easily unplug and assemble, for wire connection, there are two types--screw terminal and solder type, both supported as your prefer.
This connector could be easy connection, convenient install, DIY tools, and no need to pinch-off cable electrical plastic sets, just unscrew the ends of waterproof connector, connect the wire correctly: N for Neutral wire, G for Ground wire, L for live wire.
