Bulk Pack Track Chain Fasteners: High-Quality Link Bolts with Hex Nuts for Crawler Excavator & Dozer Track Repair - Optimal Torque Specs, Wear Resistance, Reduced Vibration Loosening

Engineered for Thermal Extremes:

• Material: A286 Superalloy (Fe-Ni-Cr) | ASTM A453 Grade 660

• Temp Range: -200°C to +700°C Continuous Service

• Coating: Aluminized Diffusion Layer (100µm) + Ceramic Sealer

• Strength: 140 ksi Yield at 650°C (per ASTM E21)

• Certifications: ASME B18.2.1, API 20E, DNV GL-OS-C401

Technical Superiority:
These bolts resist oxidation, creep deformation, and thermal cycling fatigue in environments where standard steel fasteners fail. The A286 core’s gamma-prime precipitates maintain 85% tensile strength at 600°C vs. 35% for Grade 8.8 steel. Aluminized coating forms a stable α-Al₂O₃ barrier, reducing scale formation by 90% (tested per ASTM G54). Rolled threads with UNJ profile (MIL-S-8879) prevent stress-cracking under rapid quenching scenarios.

Critical Applications:

• Hot slag handling dozers (steel mills)

• Underground coal fire zones

• Arctic permafrost operations

• Geothermal drilling rigs

Performance Validation:

OEM-Specific Kits:

Installation Protocol:

1. Pre-heat: Bolts to 150°C (infrared) in sub-zero environments

2. Torque Sequence:

   • Step 1: 30% spec torque (e.g., 330 Nm for M24)

   • Step 2: 60% spec torque

   • Step 3: 100% + 90° angle tightening

3. Post-Installation: Apply high-temp anti-seize (Fe-based, 1,200°C rating)

Maintenance Advantages:

• Reusability: Withstands 5 re-torque cycles at 500°C+

• Inspection: Thermal discoloration indicator (blue hue = >550°C exposure)

• Failure Prevention:

  • Zero liquid metal embrittlement (LME) with Zn/Al alloys

  • Immune to chloride stress corrosion cracking (CSCC)

Supply Options:

• Standard: Zinc-nickel plated for indoor storage

• Vacuum-Sealed: Argon-filled bags for critical projects

• Traceability: Laser-etched QR codes → Material Certs (EN 10204 3.2)

Key Technical Highlights

1. Metallurgy:

   • 25% Cr / 15% Ni / 2% Ti / 1.5% Mo composition

   • Solution treated @ 980°C → Aged @ 720°C

2. Coating Science:

   • Hot-dip aluminizing @ 700°C → Diffusion annealing

   • Sealer: Waterglass-based SiO₂ ceramic (5–8µm)

3. Testing Compliance:

   • Creep rupture: 10,000 hrs @ 600°C / 350 MPa (ISO 204)

   • Charpy V-notch: 50J min @ -196°C (LNG applications)

4. Endurance Data:

   • Field lifespan: 2–3× standard bolts in kiln feed dozers

   • Maintenance cost reduction: 41% (Case study: Copper smelter, Chile)

   • 

   • WhatsApp:+861803906767