The Front Wheel Speed Sensor with OEM reference numbers 8-98006186-0 and 8-98219393-0 (also 8980061860 and 8982193930) is a verified direct-fit replacement for a wide range of ISUZU NPR, NQR, and NNR series trucks. This sensor is a critical component of the Anti-lock Braking System (ABS), responsible for detecting wheel speed and transmitting signals to the ECU to prevent wheel lockup during braking.

Primary Appliions (ISUZU Trucks):

Installation Guidelines (Reference ISUZU workshop manual for complete steps):

1. Safety first — securely support the vehicle on jack stands
2. Remove the front wheel for access
3. Loe the wheel speed sensor — typically mounted on the inner frame rail, next to the front tire
4. Disconnect the electrical connector from the sensor
5. Remove the mounting bolt securing the sensor
6. Carefully remove the old sensor from the mounting hole
7. Clean the sensor mounting hole and surrounding area — remove all debris
8. Compare the new sensor with the old unit — verify part number matches
9. Ensure the sensor tip is clean before installation
10. Install the new sensor into the mounting hole
11. Install and torque the mounting bolt to manufacturer specifiion (8.3 N·m / 73 in·lbf)
12. Reconnect the electrical connector
13. Reinstall the wheel and torque lug nuts to specifiion
14. Road test — verify ABS warning light is off and braking performance is normal

Maintenance Schedule:

• Inspect wheel speed sensors and wiring for damage during routine service
• Clean sensor tips if contaminated with debris or metal particles
• If a sensor has failed, inspect the sensor rotor for damage
• Always replace sensors in pairs (both front wheels) for balanced ABS performance

• Individually sealed in protective packaging
• Neutral packaging or custom branding available upon request
• Sold individually
• Bulk wholesale available in master cartons
• Suitable for: ISUZU specialist repair shops, commercial vehicle maintenance depots, fleet maintenance suppliers, auto parts distributors