Camshaft Angle Sensor 8-98014831-0 For ISUZU ELF 4HK1 Engine 8980148310

Precision-engineered camshaft position sensor monitors camshaft position and speed, providing critical data to the ECU for precise fuel injection timing and engine synchronization in ISUZU 4HK1 diesel engines.

• OE Quality: Manufactured to strict ISUZU dimensional and electrical specifiions for perfect fit and function
• Precision Sensing: High-quality Hall-effect sensing element provides accurate, reliable camshaft position data
• Durable Construction: Robust housing withstands extreme temperatures, vibration, and exposure to engine oil
• 3-Pin Design: Facilitates a secure connection to the vehicle's wiring harness for uninterrupted data flow
• Reliable Signal Transmission: Precision electrical connector ensures secure, consistent communiion with the ECU
• Optimizes Engine Performance: Accurate cam position data enables precise fuel injection timing for maximum power and efficiency
• Ensures Reliable Starting: Accurate sensor data is essential for proper engine start-up and cylinder identifiion
• Restores Drivability: Eliminates rough idling, stalling, and loss of power caused by faulty sensors
• Direct Replacement: Simple plug-and-play installation with OE-spec connector
• Long Service Life: Engineered for reliability in demanding commercial appliions
• Essential Component: Critical for engine management system operation

This camshaft angle sensor is specifically designed for ISUZU vehicles and equipment equipped with the 4HK1 engine. Common appliions include:

• ISUZU ELF – Light to Medium-Duty Trucks
• ISUZU NPR – Medium-Duty Trucks
• ISUZU NQR – Medium-Duty Trucks
• ISUZU 700P – Medium-Duty Trucks
• ISUZU FRR – Medium-Duty Trucks
• ISUZU FSR – Medium-Duty Trucks

ISUZU 4HK1 Engine Specifiions:

• 4-Cylinder, Inline Diesel
• Displacement: 5.2L (5193cc)
• Turbocharged, Intercooled
• Common Rail Fuel Injection System
• Widely used in ELF, NPR, NQR, and 700P series trucks

Professional installation recommended. Proper electrical safety is essential:

1. Disconnect battery – Disconnect the negative battery cable before beginning work
2. Loe the camshaft angle sensor – Identify the camshaft position sensor on the engine, typically near the camshaft or valve cover
3. Disconnect the electrical connector – Carefully unplug the 3-pin wiring harness connector from the sensor
4. Remove the old sensor – Unbolt and remove the old camshaft position sensor
5. Inspect the mounting hole – Check the mounting bore for debris, damage, or metal shavings
6. Clean the mounting area – Clean the mounting surface and surrounding area
7. Inspect the O-ring/seal – Check the sensor O-ring for damage; replace if necessary
8. Prepare the new sensor – Inspect the new sensor and verify it matches the original
9. Install the new sensor – Position the new sensor and secure with mounting bolts
10. Check the air gap – Ensure the sensor is properly positioned with the correct gap to the camshaft reluctor wheel
11. Connect the electrical connector – Plug the 3-pin wiring harness into the new sensor
12. Reconnect battery – Reconnect the negative battery cable
13. Clear fault codes – Use a diagnostic tool to clear any fault codes related to the camshaft position sensor
14. Start the engine – Start the engine and verify proper operation, smooth idle, and no warning lights
15. Check live data – Monitor live data from the sensor using a diagnostic tool to verify correct readings
16. Test drive – Test drive the vehicle to verify restored engine performance

• Material Verifiion: Confirms housing and sensing element materials meet OE specifiions
• Dimensional Inspection: Housing dimensions, mounting points, and connector pin positions verified against OEM tolerances
• Electrical Testing: Sensor output signal and voltage verified for accuracy across the operating range
• Temperature Testing: Sensor operation verified across the operating temperature range
• Sealing Integrity: Sensor sealing verified to protect internal components from moisture and contaminants
• Visual Inspection: 100% checked for defects, machining flaws, or damage
• Packaged Safely: Protected in anti-static packaging to prevent electrostatic damage during transit

• Neutral export packing or customized packaging available
• Carton or wooden case for safe transportation
• Fast delivery for stock items
• Shipping by Express Air or Sea

For pricing, availability, or bulk purchase of the Camshaft Angle Sensor 8-98014831-0 For ISUZU ELF 4HK1 Engine 8980148310, please contact our sales team for a competitive quote and expert technical support.