Full Color 2.8 Inch 240x320 Small TFT LCD Display RGB Screen IPS All Viewing
This 2.8-inch TFT LCD display features 240x320 resolution with IPS technology for wide viewing angles and accurate color reproduction. Ideal for industrial, medical, and consumer electronics applications.
Key Specifications
| Parameter | Value |
| Screen Size | 2.8 Inch (diagonal) |
| Resolution | 240RGB(H) × 320(V) |
| Display Area | 43.20(H) × 57.60(V) mm |
| Brightness | 300 cd/m² |
| Interface | MCU 8/16bit |
| Driver IC | ST7789V |
Detailed Technical Specifications
| Item | Specification | Unit |
| Pixel Pitch | 0.18 × 0.18 | mm |
| Outline Dimension | 50.00 × 69.20 × 2.30 | mm |
| Pixel Arrangement | RGB Vertical Stripe | -- |
| Display Mode | Normally Black | -- |
| Viewing Direction | ALL | -- |
| Display Color | 262K | -- |
| Contrast Ratio | 500:1 | -- |
| Back-light | LED Side-light type | -- |
| Operation Temperature | -20 ~ 70 | ℃ |
| Storage Temperature | -30 ~ 80 | ℃ |
Product Features
- IPS Technology: Wide viewing angles with minimal color deviation from any direction
- High Resolution: 240×320 pixels with 0.18×0.18mm pixel pitch for sharp display
- Multiple Interfaces: Supports SPI serial port and 8/16-bit MCU parallel port
- Excellent Color: 262K color depth with accurate color reproduction
- Wide Temperature Range: Operates from -20℃ to +70℃
- High Brightness: 300 cd/m² brightness with 500:1 contrast ratio
Applications
- Industrial Control: Automation equipment, instruments and meters
- Smart Home: Smart door locks, appliance control panels
- Consumer Electronics: MP3 players, electronic dictionaries, portable game consoles
- Medical Equipment: Portable diagnostic devices, medical monitors
Frequently Asked Questions
Can I get a custom LCD display with different dimensions?
Yes, we can customize the LCD display based on your specifications. Please provide your drawing or sample for reference.
Can you modify the display type (e.g., from HTN to STN)?
Yes, we can change the display type according to your requirements.
What is the lead time for custom LCD modules?
Tooling typically takes 15-25 days after drawing confirmation and payment. Mass production takes 15-30 days.
Do you provide samples?
Yes, we can provide samples of our standard products for evaluation.