Y-anchor V-anchor to Fix Ceramic Blanket Refractory Cement

Product Description

In tunnel engineering, Y-shaped anchoring components exhibit unique advantages. When using grouting type Y anchor rods for support in weak surrounding rock sections, their three branches can form umbrella shaped support surfaces, significantly increasing the contact area with the rock mass. Engineering practice has shown that this structure can increase anchoring force by more than 20% and effectively control surrounding rock deformation. In the construction of subway tunnels, the Y-shaped anchoring system used in combination can withstand a tensile force of up to 50kN, providing strong supplementary reinforcement for the initial support structure.

Product Features

The product specifications cover various sizes ranging from 8 × 60 to 8 × 160, suitable for different insulation layer thicknesses. Fixed by hammering during installation without the need for specialized tools. The usage quantity is adjusted according to the wall structure and floor height, with a conventional density of 6-9 pieces/square meter, and densely arranged in areas such as corners and hole edges, with a spacing of no more than 300mm. Some models adopt a V-shaped opening design (such as V-shaped anchor nails) to improve seismic performance and bearing capacity by increasing friction, suitable for hard material reinforcement scenarios such as concrete and curtain walls.

technical Parameters

FAQ

Q1 : How can you control your quality?
A1 : For each production processing, We have complete QC system for the chemical
composition and Physical properties. After production, all the goods will be tested, and
the quality certificate will be shipped along with goods.

Q2: Are you a manufacture or trader?
A2: We are truly a manufacturer, we not only can provide the high quality products with the
best price, but also can offer the best pre-sale service and after-service.

Q3 : Do you provide free samples?
A3 : Of course, free samples are available.

Q4 : What is your lead time?
A4 : It usually needs about 15- 20 days after receiving the PO.

Q5 : Can we visit your company?
A5 : Yes, for sure, you are welcome to visit company and our products.
Also, we can talk more about the technique details if you need.

Q6 : What is the warranty of your products?
A6 : Our products have at least 1 year warranty,if any quality problems,
we will take responsibility of the cost of the shipment and the replacement.

Q7: What's the MOQ of trial order?
A7 : No limit, we can offer the best suggestions and solutions according to your condition.

Q8: Why choose us?
A8: We had been in this line for more than 25 years, we can not only provide you high
quality products with competitive price, but also we can supply good technique service
which can help you solve problems.