PVC Panel Electrical Transmission Lines , Switch Control Overhead Electric Lines

Electrical Transmission Lines Application

PVC panel wiring for use in the switch control, relay and instrumentation panels of power switchgear and for purposes such as internal connectors in rectifier equipment, motor starters and controllers.

Manufactured in accordance with European Harmonised Standard H05V-K and H07V-K, primarily used as flexible panel wire and is available in a wide range of different colours for this purpose. Designed for internal equipment wiring in switch control, relay and instrumentation panels of power switchgear, and for purposes such as internal connectors in rectifier equipment, motor starters and controllers, this flexible cable can be installed in open air, in conduits, or in trunking.

Electrical Transmission Lines Standards

The electrical and dimensional properties of this product are measured by the Technical and Quality Assurance department at the National Cable Factory laboratory. Cable performance in respect of conductor resistance, construction quality (workmanship), dimensional consistency, and other parameters are verified to published standards and approved product drawings. Conformance to RoHS (Restriction of the use of Hazardous Substances) is determined and confirmed.

Electrical Transmission Lines Construction

Conductor
Class 5 flexible copper conductor according to
BS EN 60228

Insulation
PVC (Polyvinyl Chloride) Type TI1 according to BS EN 50363

Characteristics

Voltage Rating (Uo/U)
H05V-K: 300/500V
H07V-K: 450/750V

Temperature Rating
Fixed: -30°C to +70°C
Flexed: -5°C to +70°C

Minimum Bending Radius
<12: 5 x overall diameter
>12: 6 x overall diameter

Sheath Colour
Red, Black, Blue, Orange, Yellow, White, Green/Yellow, Grey, Brown, Violet, Pink

Size, Weight & Electrical Specification