Universal XLPE Insulated Low Voltage Power Cable For Power Transmission

POWERHARD RV U-1000 R2V cable has been specially designed for low voltage industrial-type connections, urban grids, building installations, etc. It can be buried or installed in a tube as well as outdoors without requiring additional protection. Lastly, the POWERHARD® RV / U-1000 R2V cable can withstand damp conditions including total immersion in water (AD7).

POWERHARD RV U-1000 R2V cable performance

Electrical performance

LOW VOLTAGE 0,6/1kV

Standard

IEC 60502-1 / UNE 21123-2 / NF C 32-321

Approvals

CE

BUREAU VERITAS

NF-USE

RoHS

Construction Product Regulation

E_ca

Thermal performance

Maximum service temperature: 90ºC.

Maximum short-circuit temperature: 250ºC (max. 5 s).

Minimum service temperature: -40ºC (fixed and protected installations).

Fire performance

Flame non-propagation based on UNE-EN 60332-1 and IEC 60332-1.

Reduced emission of halogens. Chlorine <15%.

Mechanical performance

Minimum bending radius: x5 cable diameter.

Impact resistance: AG2 Medium severity.

Chemical performance

Chemical & Oil resistance: Good.

UV Resistant: UNE 211605 and NF-C 32-323.

Water performance

Water resistance: AD7 Immersion.

Other

Meter by meter marking.

Installation conditions

Open Air.

Buried.

In conduit.

Applications

Industrial use.

Distribution network.

POWERHARD RV U-1000 R2V cable design

Conductor

Electrolytic copper, class 1 (up to 4 mm2) or class 2 (from 6 mm2) based on EN 60228 and IEC 60228.

Insulation

Cross-linked polyethylene (XLPE).

The standard identification of insulated conductors is the following:

1 x Natural

2 x Blue + Brown

3G Blue + Brown + Green/yellow

3x Brown + Black + Grey

4G Brown + Black + Grey + Green/yellow

4x Brown + Black + Grey + Blue

5 G Brown + Black + Grey + Blue + Green/yellow

Outer sheath

Flexible PVC, black colour.

Technology

1. Conductor

Electrolytic copper, class 1 (up to 4 mm2) or class 2 (from 6 mm2) based on EN 60228 and IEC 60228.

2. Insulation

Cross-linked polyethylene (XLPE)

The standard identification of insulated conductors is the following:

1 x Natural

2 x Blue + Brown

3G Blue + Brown + Yellow/Green

3x Brown + Black + Grey

4G Brown + Black + Grey+ Yellow/Green

4x Brown + Black + Grey + Blue

5 G Brown + Black + Grey + Blue + Yellow/green

3. Outer sheath

Flexible PVC, black colour.