1300*1710*1800mm W*H*D Chitherm HRF216-07 Hot Air Dryer perfect for various industrial applications.

Mainly used for binder burning out (BBO) process of electronic components and ceramic substrates.

• Rated Temperature: 600ºC
• Max Temperature: 650ºC
• Effective Dimensions: 600 × 600 × 600mm (W×H×D)
• Heating Method: Stainless Steel Heater
• Process Atmosphere: Air
• Temperature Control Stability: ±1ºC, with PID parameter self-tuning function
• Temperature Uniformity: better than ±5ºC (insulation 1 hour at 400ºC test)
• Thermocouple: Type K
• Temperature Control Points: 1
• Temperature Measurement Points: 1 point
• Process Steps: 4 × 16 steps
• Exhaust: One exhaust port on top
• Alarm System: Over temperature, thermocouple failure and other abnormal conditions will activate sound and light alarm protection
• Max Heating Power: 24kW
• Insulation Power: ≤ 12kW
• Surface Temperature Rise: ≤ 35ºC
• Weight: about 1000kg
• Furnace Dimensions: about 1300×1710×1800mm (W×H×D)
• Appearance Color: light gray

• Environmental conditions: Temperature 0 - 40ºC, humidity ≤ 80% RH, no corrosive gas, no strong airflow disturbance.
• Process air conditions: Clean compressed air, pressure 0.2 - 0.4Mpa, gas consumption 3-7m3/h.
• Ventilation system: Non-contact access to the user pumping system, pumping capacity greater than 10m3/h.
• Ground requirements: Level, no obvious vibration, bearing capacity >300Kg/m2.
• Power conditions: Capacity greater than 32kVA, 3 phases 5 lines, voltage 220/380V, frequency 50Hz (according to local situation). Live wire: yellow, green, red, neutral wire: blue, ground wire: yellow-green.
• Installation site: 2000mm×3000mm×3000mm (W×H×D), installation area greater than 6m2.