HWF80-04N Type Dehydrogenation Furnace

The HWF80-04N type dehydrogenation furnace is suitable for medium-temperature heat treatment of electronic products. It is primarily used for sintering processes of related materials under nitrogen or vacuum environments. The furnace is fully equipped with a real-time computer monitoring system, making it particularly suitable for material process testing requirements in research institutes.

• Rated Temperature: 350°C (unlimited platform time)
• Maximum Temperature: 400°C
• Tank Material: SUS316L
• Effective Dimensions: 400×400×500mm (W×H×D)
• Loading Method: Manual loading, with horizontal guide rails and racks inside the tank body
• Heating Element: Stainless steel heating tube for internal heating
• Heating Method: Hot air circulation heating
• Maximum Heating Power: 15kW
• Idle Furnace Insulation Power: ≤7.5kW
• Temperature Rise Rate: ≤5°C/min
• Temperature Control Accuracy: ±1°C, with PID parameter self-tuning function
• Temperature Uniformity: ±5°C (350°C constant temperature test for 1 hour in an empty furnace)
• Thermocouple Type: K-type
• Number of Temperature Control Points: 1 point
• Temperature Measurement Method: Reserved inspection port, can install armored flexible thermocouples for real-time monitoring
• Number of Program Steps: 20 steps
• Sintering Atmosphere: Vacuum/Nitrogen
• Oxygen Detection: Equipped with a micro-oxygen analyzer to detect the oxygen content inside the tank body (inert atmosphere state with positive pressure inside the tank)
• Oxygen Content: Better than 50ppm
• Ultimate Vacuum Degree: 10^-2 Pa (empty furnace, clean, room temperature, fully degassed)
• Vacuum Pumping Time: From atmospheric pressure to 10^-2 Pa ≤60 minutes
• Cooling Method: Furnace cooling, cooling from 350°C to room temperature in less than 12 hours
• Exhaust Port: 1
• Surface Temperature Rise: <35°C
• Alarm Protection: Overtemperature, thermocouple breakage, low air pressure, low water pressure, motor under-voltage and other sound and light alarm protections, with overtemperature alarm cut-off heating protection function
• Equipment Weight: About 1000kg

• Power supply - Capacity greater than 22kVA, 3-phase 5-wire, 220/380VAC, 50Hz
• Nitrogen gas - 0.2～0.4MPa, 99.999% high-purity nitrogen, consumption 2～6m³/h
• Ventilation conditions - Clean, dry, oil-free compressed air, pressure 0.4~0.8Mpa
• Water inlet conditions - 0.1~0.3Mpa, clean, non-corrosive, supply flow rate 1~3L/min
• Installation site - 3000mm×2500mm×3000mm (D×W×H), installation area greater than 8m²
• Ventilation system - Non-contact connection to user exhaust system, exhaust capacity greater than 10m³/h

Shipping Cost: Contact the supplier about freight and estimated delivery time.

Support payments in USD

Secure payments: Every payment you make on Made-in-China.com is protected by the platform.

Refund policy: Claim a refund if your order doesn't ship, is missing, or arrives with product issues.