EPDM Manufacturing, Colored EPDM Rubber Granules/Scrap/Chips
Colored EPDM granules are made from a compound of Virgin EPDM rubber, specialist pigment and UV stabilizers. Blocks of the rubber compound are produced under carefully controlled factory conditions which are then granulated to small, unified crumbs of a definite size (fractional composition) at high speed. Dust is removed at every stage to ensure the finished granules are as clean as possible. Throughout the process, thorough testing ensures that the chemical and physical properties are of consistently high quality.
| Granule Size | 0.5-2mm, 1-2mm for use as spray coating; 1-3mm, 1-4mm for use as base and surface |
|---|---|
| Content | 8%-33% EP rubber, light calcium carbonate, etc. |
| Color | Red, green, yellow, blue, etc. - all colors as per customer requirements |
| Hardness | 70 shore A |
| Tensile Strength | ≥2.0 Mpa |
| Elongation Rate At Break | ≥105% |
| Compression Recovery Rate | ≥98% |
| Rebound Resilience | ≥22% |
| Flame Resistant Property | 1 |
| Warranty | 8-10 years |