► Input Voltage 36-72VDC; Output 24VDC (Passive)
► Integrated Gigabit PoE Inserter
► High Power 24W
► Support 10/100/1000Base-T
► Nominal Frequency 50/60KHz
► High Efficiency > 85%
► Over-Voltage/Load/Temperature & Short Circuit protections
► Plug & Play, no configuration required
► Safe and Reliable Power to WLAN Access Points
► Automatic Detection and Protection of Non-standard Ethernet Terminals
► Storage Temperature: -20°C to 70°C
The LNK-DC-P24G is a low cost and high efficiency solution for those requiring Passive Power over Ethernet from a 36-72VDC voltage source. They have an integrated POE injector to apply the power and data output to the CAT5/6 Ethernet cable. The output voltage is regulated and protected.
They have a common (-) and two (+) for connecting 2 power sources, such as a primary with a backup power source. A metal enclosure model is available for industrial applications.
They accept Gigabit data-in to a shielded RJ45 Jack and provide gigabit data-out and PoE power on the shielded RJ45 output jack. It works by supplying power on Ethernet pins 4,5(V+) and 7,8(V-). This converter has various protections for surge, short circuit and overload. Other models have power outputs up to 24W.
Ethernet | |
Standards: | IEEE 802.3 10Base-T Ethernet |
| IEEE 802.3u 100Base-TX Fast Ethernet |
| IEEE 802.3ab 1000Base-T Gigabit Ethernet |
Processing Type: | Forward |
| Half-duplex, Full-duplex |
Forward Filter Rate: | 1,488,000pps (1000Mbps) |
Cabling: | 10/100/1000Base-T: Cat5 or above |
Maximum Distance: | Cat. 5, 5e, 6 up to 100m (328ft) |
Connector: | LAN: 1 x RJ-45 STP, “Data” Input Port POE: 1 x RJ-45 STP, “Data + Power” Output Port |
36-72VDC IN, 24V 24W Gigabit Passive PoE OUT, DC to DC Converter and PoE Injector Ordering Information
Model | Description |
LNK-DC-P24G | 36-72VDC IN, 24V 24W Gigabit Passive PoE OUT, DC to DC Converter and PoE Injector |