Product Advantages
· 3R Repeater,
· Support Jumbo Frame
· Transparent Transport and very low delay
· Support ITUT prescribed DWDM/CWDM wavelength
· Support DMI function for SFP+/XFP fiber module
· Support Loopback test function
· Support Web management
· Full State Led display
· Easy installation
Overview
E-link Standalone 10G OEO Converter (3R Repeater) with SFP+ to SFP+ Slot, XFP to XFP Slot, SFP+ to XFP Slot optional , which uses optical -electricity – optical conversion principle to realize optical signal regeneration , enabling of the optical signal amplification and regeneration , re-timing, and wavelength conversion , with coarse / dense wavelength division multiplexing together to realized WDM transmission .
Technical Indexes
| Transmission Speed | 10Gb/s (9.95Gb/s-11.35Gb/s) |
| Protocols | IEEE802.3ae (10Gbase-SR/LR/ER/ZR/LRM) |
| Access Type | 10G LAN/ 10G WAN |
| Interface Type | A Type: SFP+ To SFP+ B Type: SFP+ To XFP C Type: XFP To XFP |
| Transmission Distance | SFP+ module: Up to 80Km XFP module: Up to 80Km |
| Maximum Packet Forwarding Rate | 14,880,950/S |
| Network management information: | SFP+ or XFP fiber module detection SFP+ or XFP fiber module DMI function (Temperature, Voltage, Optical power) Link status detector Enable/Disabled Loopback test function Rate select (10Gbase-Lan or Wan) |
| power requirement | Standalone: DC5V 3A Power consumption: ≤6W |
| Work Environment | Operating Temp: 0~ 50 ℃ Storage Temp: -10~ 70 ℃ Humidity: 5%~90% (non-condensing) |
| Dimension (WxDxH) | Standalone: 173mm x 106mm x 33mm |