Portable Ultrasonic Flow & Engergy Meter
I. Introduction
 
II. Specification
| Performance | |
| Velocity Range | ±0.09ft/s ~ ±39ft/s (±0.03m/s ~ ±12m/s) | 
| Accuracy | ±1% of measured value | 
| Repeatability | 0.2% of measured value | 
| Linearity | ±1% | 
| Pipe Size | DN25~DN1200(A pair of sensors) | 
| Function | |
| Output | Analog output: 4~20mA, max load 750Ω. | 
| Pulse output: 0~10KHz | |
| Communication | RS485 Modbus | 
| Power Supply | Rechargeable Lithium Battery Power,3000mAh  | 
| Display | 240*128 back lit LCD | 
| Temperature | Transmitter: -14℉~140℉(-20℃~60℃) | 
| Transducer:-40℉~176℉(-40℃~80℃,D1) | |
| Transducer:-40℉~266℉(-40℃~130℃,D1U) | |
| Humidity | Up to 99% RH,non-condensing | 
| Physical | |
| Transmitter | NEMA13, IP54 | 
| Transducer | Encapsulated design,IP68 | 
| Double-shielded transducer cable | |
| Standard/maximum cable length:30ft/1000ft(9m/300m) | |
 
III.Accessories
IV. Configuration
| Model | Transmitter | 
| ML-6100P | PortableType | 
| Velocity Range:±0.09ft/s ~ ±39ft/s (±0.03m/s ~ ±12m/s) | |
| Accuracy :±1% of the measure value | |
| Repeatability:0.2% of the measure value | |
| Display:240*128 back lit LCD | |
| Internal Lithium Power Supply: 3000mA | |
| Transmitter Enclosure: IP54 | |
| Output: OCT pulse output 0-10KHz, Relay output, 4-20mA for option | |
| Communication: RS485 | |
| Code | Type of Trnansmitter | 
| 1 | Ultrasonic Flow Meter | 
| 2 | Ultrasonic Energy / BTU Meter(RTD) | 
| Code | Transducer | 
| D1 | Clamp-on, IP68. Operating temperature:-40 ℉ ~ +176 ℉(-40℃ ~ +80 ℃) | 
| D1U | Clamp-on, IP68. Operating temperature:-40 ℉ ~ +266℉(-40℃ ~ +130 ℃) | 
| Code | Type of Mounting Bracket | 
ST  | Single guide mounting type bracket  | 
| DT | Double guide mounting type bracket  | 
| Code | Transducer Cable Length | 
| P5 | Standard length 16ft (5m) | 
| PXX | XX is the length you need for cables, Maximum length is up to 30m.  | 
| Code | Temperature Transducer | 
| PT1000 | PT1000 temperature transducer+RTD module(option) |