LC1D32M7C belongs to Schneider’s classic TeSys Deca AC contactor series, a 3-pole electromagnetic switching component with rated 32A AC-3 load current and AC220V 50/60Hz control coil. It is mainly applied for remote switching on/off of three-phase asynchronous motors and other AC resistive/inductive loads in control cabinets. Equipped with built-in 1NO+1NC auxiliary contacts to feed back running status signal to PLC or control circuit; compatible with thermal overload relay to assemble complete motor starter set for overload & phase-failure protection. It supports standard 35mm DIN rail snap mounting or panel screw fixing, widely configured inside MCC control cabinet for automated equipment power loop control.

1. Standard 3P Main Contact + Fixed Auxiliary Contact: 3NO main power contacts plus integrated 1NO+1NC auxiliary contact for status feedback, no extra auxiliary module needed for basic logic control.
2. Superior Electrical & Mechanical Lifespan: Mechanical endurance over 10 million operations, AC-3 electrical service life up to 1 million switching cycles, stable for high-frequency start-stop industrial scenes.
3. High-efficient Arc Extinguishing & Anti-interference: Optimized arc-chute structure and silver alloy contact material, excellent arc suppression to avoid contact welding under frequent startup load.
4. Flexible Dual Mounting Option: Quick snap-on 35mm EN DIN rail installation or direct screw panel mounting, convenient for cabinet layout modification.
5. Wide Working Voltage Tolerance: Coil reliably pulls in at 85%~110% rated AC220V, releases at 20%~75% rated voltage, adapts to unstable on-site power grid fluctuation.
6. Full Global Certification: CE, IEC60947, UL, CCC, RoHS certified, fully meet ECE international electrical component specification for global export projects.