ITI Straumann Bone Level Straight Multi Unit Implant Abutment

ITI Straumann Bone Level® Titanium Multi unit Straight Abutment Compatible

NC 3.3mm/ RC 4.1mm

Desciption:

This staight abutment comes with a screw that takes a Straumann-Torx driver

This abutment is prep-able with a 1mm/2mm/3mm collar height. (Or according your customize request)

Material:
Ti 6AI-4V ELI (Supply from Germany)

Feature:

* Titanium interface abutment
* 1pc Screw Included

* Precision machined up to ± 5µm
* Combination of high fatigue strength
* Superior level of biocompatibility

* Can production Custom interface

Approved by CE, ISO 9001, ISO 13485

Product Description

ITI Straumann Bone Level ® Titanium Multi unit Straight Abutment are prefabricated, screw-retained intraoral abutments intended to be connected directly to endosseous implants in partially or fully edentulous patients for the retention of cast or milled bar overdentures. For implant-supported prostheses, six or more implants are recommended in the maxilla, four or more in the mandible. If clinical conditions dictate fewer implants, an implant-retained, tissue-supported prostheses is indicated. Multi-unit abutments are precisely machined from titanium alloy, and are available with a variety of collar heights to achieve optimal emergence from shallow or deep gingival wells. Each Inclusive Multi-Unit Abutment is shipped with a delivery carrier color-coded to indicate the restorative platform of the seated implant.

Straight multi-unit abutments lack any anti-rotational features at the implant-abutment interface. The apical portion of a straight multi-unit abutment is threaded for attachment with the internal connection of a seated implant. For abutment delivery, the occlusal surface features a male hex head compatible with the Inclusive Multi-Unit Driver.

Contraindications

The following conditions would contraindicate use of ITI Straumann Bone Level ® Multi-Unit Abutments: (a) greater than 45 degrees divergence from parallel for a splinted restoration when using 30-degree angled multi-unit abutments; (b) greater than 32 degrees divergence from parallel for a splinted restoration when using 17-degree angled multi-unit abutments. Angled abutments should not be used to restore small-diameter implants (less than or equal to 3.0 mm) in the posterior region.

Sterility

ITI Straumann Bone Level® Titanium Multi unit Straight Abutment are packaged NON-STERILE. Prior to use in the oral environment, they should be cleaned, disinfected, and sterilized before use.