16/32-port RS-232/485/422 Serial Device Server
   
  Introduction
   
  NP5100 series are the safe serial networking server that can make serial device be equipped with networking capability instantly and centrally manage the scattered serial devices and hosts via network. This product supports 16/32 RS-232/485/422 serial ports to 2 100M Ethernet copper ports. It adopts rack mounting to meet the requirements of different application scenes.
   
  Serial device server supports multiple network protocols, such as TCP, UDP, TELNET, ARP, ICMP, HTTP, HTTPS, SMTP, SNTP, DNS and DHCP protocol. It also possesses complete management functions, including Access Control, Rapid Configuration, Online Upgrading and so on. Each serial port supports 4 TCP or UDP session connections, and it also supports TCP Server, TCP Client, UDP Server, UDP Client work modes and TELNET, WEB and SSHD access modes. Furthermore, supplied management configuration tool based on Windows platform can guide the user to manage and configure the device, achieving immediate networking of serial device via simple settings. It can provide users with good experience with friendly design of network management system interface, simple and convenient operation.
   
  This product supports optional OLED display, which could conduct IP address configuration without using external device. The SD card design of this device can achieve software upgrade. Hardware adopts fanless, low power consumption, wide temperature and voltage design and has passed rigorous industrial standard tests, which can adapt to the industrial scene environment with harsh requirements for EMC. It can be widely used in custom checkpoint system, smart gas station, data center and industrial automation, etc.
   
  Features and Benefits
   
   	- Support 2 10/100Base-T(X) self-adaptive Ethernet interfaces and provide dual IP and MAC addresses to meet the requirements of multi-network management or network backups
  	- Support 300bps-115200bps line speed and non-blocking communication
  	- Support TCP Server, TCP Client, UDP Server, UDP Client and other operating modes
  	- Support OLED display that could configure device IP address
  	- Support cross-gateway and cross-router communication
  	- Support multiple hosts polling mode, which allows multiple hosts to access the same serial port
  	- Support delimiter matching communication, achieving various demands for serial port packaging
  	- Support FIFO, compatible with various old type terminal devices
  	- Support IP address and MAC address filtering, which can achieve accurate access control easily
  	- Support graded user management to implement humanized authority management
  	- Support serial port status, parameters and error information monitoring, ensuring the communication status be clear at a glance
  	- Support RTS/CTS, DTR/DSR and XON/XOFF flow control
  	- Compatible with various virtual serial port management software
  	- Support virtual serial port drive access mode and automatic connection recovery after network interruption
  	- Flexible serial port data framing setting, which can satisfy user’s various demands for data packets segmentation
  	- Support standard TCP/IP SOCKET application access
  	- TCP supports multi-connection, which allows maximum 4 users to monitor or manage the serial device simultaneously
  	- UDP supports single machine or multi-machine communication, which allows multiple users to monitor or manage the serial device simultaneously
  	- Support multiple configuration forms like Windows configuration tool, TELNET, SSHD and WEB
  	- SSHD and HTTPS configuration can guarantee the access security of data
  	- Support multiple alarm methods, including e-mail alarm, log alarm and system alarm
  	- Support multiple alarm events including power supply connection, warm start, cold start, DCD and DSR
  	- Conduct network diagnosis and troubleshooting via Ping and Traceroute
  	- Support ARP function, which can prevent communication interrupt caused by the switch and router aging the MAC address of serial server
  
  Specification
   
   	 		 			|  			     			Ethernet Port  			 |  			 			     			Standard: 10Base-T, 100Base-TX   			Protocol: TCP, UDP, ARP, HTTP, HTTPS, TELNET, ICMP, SMTP, SNTP, DHCP, DNS   			Rate: 10/100M Automatic Flow Control, MDI/MDI-X Autotunning   			Interface form: RJ45   			Interface quantity: 2   			Duplex mode: Full/Half Duplex Mode Self-adaptive    			Work mode: 4 sessions, support work modes such as TCP Server, TCP Client, UDP Server and UDP Client   			   			 |  		
 		 			| Serial Port |  			 			     			Standard: EIA RS-232C, RS-485, RS-422   			Quantity of serial port: 16/32 3IN1 serial ports   			RS-232 signal: RXD, TXD, DTR, GND, DSR, RTS, CTS, DCD   			RS-485 signal: D+, D-, GND   			RS-422 signal: T+, T-, GND, R+, R-   			Baud rate: 300~115200bps   			Data bit: 5bit, 6bit, 7bit, 8bit   			Parity bit: None, Even, Odd, Space, Mark   			Stop bit: 1bit, 1.5bit, 2bit   			Interface form: RJ45   			Flow control: RTS/CTS, DTR/DSR, XON/XOFF   			Direction control: RS-485 direction adopts Automatic Data Direction Control (ADDC)   			Load capacity: RS-485/422 end supports 32 points polling (customizable 128 points)   			Transmission distance: RS-232, 15m; RS-485/422, 1200m   			Pull high/low resistor for RS-485: 4.7kΩ   			Electromagnetic isolation strength: 1kVDC   			   			 |  		
 		 			|  			     			Console port   			   			 |  			CLI command line management port (RS-232), RJ45 |  		
 		 			| Configuration |  			 			     			WEB configuration management, TELNET configuration, Windows configuration tool, SSHD configuration   			   			 |  		
 		 			| Security |  			 			     			Classification of User Permissions, IP address filtering, MAC address filtering, HTTP/HTTPS console, TELNET console   			   			 |  		
 		 			|  			     			Indicator   			   			 |  			Power supply indicator, Ethernet port indicator, serial port indicator, running indicator |  		
 		 			|  			     			Power   			Requirement   			   			 |  			 			     			85~265VAC dual power supply redundancy, AC power supply socket with switch   			   			 |  		
 		 			|  			 Power   			Consumption  			 |  			 			     			No-load: 5.6W@220VAC   			Full-load: 13.2W@220VAC   			   			 |  		
 		 			|  			 Environmental   			Limit  			 |  			 			     			Operating temperature: -40~75℃   			Storage temperature:-40~85℃   			Relative humidity: 5%~95%(no condensation)   			   			 |  		
 		 			|  			 Physical   			Characteristic  			 |  			 			     			Housing: IP40 protection, metal   			Installation: rack mounting   			Dimension (W x H x D): 440mm×44mm×265.6mm   			Weight: 3.04kg   			   			 |  		
 		 			|  			 Industrial   			Standard  			 |  			 			     			IEC 61000-4-2 (ESD, electrostatic discharge), Level 4   			Air discharge: ±15kV   			Contact discharge: ±8kV   			    			IEC 61000-4-4 (EFT, electrical fast transient), Level 4   			Power supply: ±4kV   			Ethernet port: ±2kV   			Serial port: ±2kV   			    			IEC 61000-4-5 (Surge), Level 4   			Power supply: common mode±4kV, differential mode±2kV   			Network port: common mode±4kV, differential mode±2kV   			Serial port: common mode±4kV, differential mode±2kV   			    			Shock: IEC 60068-2-27   			Free fall: IEC 60068-2-32   			Vibration: IEC 60068-2-6   			   			 |  		
 		 			| Certification |  			 			     			CE, FCC, RoHS   			   			 |  		
 		 			| Warranty |  			 			     			3 years   			   			 |  		
 	 
   
  Dimension
 Unit:mm
  
  
  
  
  
   
  Ordering Information
   
   	 		 			| Available Models |  			100M Ethernet port |  			3IN1(RS-232/485/422) |  			OLED Display |  			Power Supply |  		
 		 			| NP5100-2T-32DI(3IN1)-RJ-OLED |  			2 |  			32 |  			1 |  			 			 85~265VAC   			dual power supply  			 |  		
 		 			| NP5100-2T-32DI(3IN1)-RJ |  			2 |  			32 |  			- |  		
 		 			| NP5100-2T-16DI(3IN1)-RJ-OLED |  			2 |  			16 |  			1 |  		
 		 			| NP5100-2T-16DI(3IN1)-RJ |  			2 |  			16 |  			- |