MachineU > China Products > Tools & Hardware
Switching power supply capacitor AIDE CAPACITOR 1206M3L104J500NT with multilayer ceramic construction
Switching power supply capacitor AIDE CAPACITOR 1206M3L104J500NT with multilayer ceramic construction
Specifications
Voltage Rating :
50V
Capacitance :
100nF
Temperature Coefficient :
M3L
Tolerance :
±5%
Description :
50V 100nF M3L ±5% 1206 Ceramic Capacitors RoHS
Replaces Part Number :
AIDE CAPACITOR
Package :
1206
Model Number :
Switching power supply capacitor AIDE CAPACITOR 1206M3L104J500NT with multilayer ceramic construction
Description

Product Overview

High-voltage multilayer ceramic capacitors (MLCCs) designed for coupling, filtering, and resonant applications in high-voltage electronic circuits. These capacitors are suitable for use in switching power supplies, AC-DC and DC-DC converters, network/communication interfaces, LCD module backlight power supplies, and energy-saving lamp ballasts. They are manufactured with a ceramic dielectric, internal electrodes, external electrodes, and a nickel/tin termination layer.

Product Attributes

  • Temperature Characteristics: C0G (030 PPM/), X7R (15%)
  • Termination Material: Copper-Nickel-Tin (inner to outer)
  • Packaging Options: Tape & Reel (T), Bulk (P)
  • Environmental Compliance: RoHS Directive, REACH Regulation (SVHC)

Technical Specifications

Item Specification Test Method
Product Size Codes 0201, 0402, 0603, 0805, 1206, 1210, 1808, 1812, 1825, 2211, 2225 -
Nominal Capacitance (Example) 473 = 47nF (three-digit method) -
Capacitance Tolerance B: 0.1pF, C: 0.25pF, D: 0.5pF, F: 1%, G: 2%, J: 5%, K: 10%, M: 20%, Z: +80%/-20% -
Rated Voltage (DC) (Example) 500 (50V), 101 (100V), 151 (150V) (three-digit method) -
Operating Temperature Range -55 to +85 Visual Inspection
Appearance & Dimensions No visible damage; Dimensions meet specifications Visual Inspection; Caliper measurement
Static Capacitance Within specified tolerance 10uF: 1KHz10%, 1.00.2Vrms
10uF: 120Hz24, 0.50.1Vrms
Dissipation Factor (DF Value) <0.1% Cr10uF: 1KHz10%, 1V0.1rms
Cr10uF: 120Hz24, 0.5V0.1rms
Insulation Resistance >1 G Test Voltage: 250V; Test Time: 605 sec; Test Humidity: 70%; Test Temperature: 255
Withstand Voltage (DC) No dielectric breakdown or damage Test Voltage: Rated Voltage; Test Time: 2 sec
Solderability Tinning rate 95%, pinholes or rough area <5%, no visible damage Preheat: 80-120/10-30 sec; Lead-free solder: 2455; Immersion time: 21 sec
Solder Heat Resistance Appearance: No visible damage, Tinning rate 95% Preheat: 120~150/60 sec; Solder pot temp: 2705; Immersion time: 101 sec. Electrodes fully immersed. Clean with solvent. Condition at room temp for 242 hours.
Capacitance Change Rate (Solder Heat Resistance) -2.5% < C/C 2.5% -
DF Value (Solder Heat Resistance) As per NO.4 -
IR (Solder Heat Resistance) As per NO.5 -
Bending Strength No visible damage Test substrate: Al2O3 or PCB (1.6mm thick, 100mm length, 40mm width). Bending depth: 1mm. Pressing speed: 1mm/sec. Measurement under bent state.
Capacitance Change Rate (Bending Strength) |C/C| 5% -
Terminal Bond Strength No visible damage -
Temperature Cycling |C/C| 2.5% Pre-treatment: Upper temp 1 hr, condition 241 hr. 5 cycles: -55 (30 min), 25 (2-3 min), +85 (30 min), 25 (2-3 min). Condition at room temp/humidity for 242 hours before testing.
Damp Heat Test Appearance: No visible damage Temperature: 402; Humidity: 90~95%RH; Time: 50024 hours. Condition at room temp/humidity for 24 hours after test.
Capacitance Change Rate (Damp Heat) |C/C| 5% -
DF Value (Damp Heat) 2 times initial standard -
IR (Damp Heat) >500M -
High Temperature Load Test Appearance: No visible damage Condition at room temp/humidity for 242 hours after test. Temperature: 85; Time: 100048 hours; Voltage: 1.5x rated voltage (100V V 250V).
Capacitance Change Rate (High Temp Load) |C/C| 5% -
DF Value (High Temp Load) 2 times initial standard -
IR (High Temp Load) >500M -
Product Structure Ceramic Dielectric, Internal Electrode, External Electrode, Nickel Layer, Tin Layer -
Product Dimensions (Example: 1206) L: 3.200.20mm, W: 1.600.20mm, T: 1.250.20mm, WB: 0.30-0.8mm Inch Equivalent: 0.12*0.06
Packaging Dimensions (Example: 1206 Tape) A: 1.950.20, B: 3.600.20, C: 8.000.20, D: 3.500.05, E: 1.750.10, F: 4.000.10, G: 2.000.10, H: 4.000.1, J: 1.50 -0/+0.10, T: 1.85 Max -
Pieces per Reel (Example: 1206) T1.35mm: 3000 Pcs; T1.35mm: 2000 Pcs -

Standard Conditions:

  • Ambient Temperature: 20~30
  • Relative Humidity: 70% RH
  • Atmospheric Pressure: 86~106 kPa

Standard Relative Conditions (for verification):

  • Ambient Temperature: 252
  • Relative Humidity: 60~70% RH
  • Atmospheric Pressure: 86~106 kPa

2507091655_AIDE-CAPACITOR-1206M3L104J500NT_C49326733.pdf

Send your message to this supplier
Send Now

Switching power supply capacitor AIDE CAPACITOR 1206M3L104J500NT with multilayer ceramic construction

Ask Latest Price
Product Detail
Voltage Rating :
50V
Capacitance :
100nF
Temperature Coefficient :
M3L
Tolerance :
±5%
Description :
50V 100nF M3L ±5% 1206 Ceramic Capacitors RoHS
Replaces Part Number :
AIDE CAPACITOR
Contact Supplier
Switching power supply capacitor AIDE CAPACITOR 1206M3L104J500NT with multilayer ceramic construction

Beijing Silk Road Enterprise Management Services Co.,LTD

Verified Supplier
4 Years
Since 2009
Business Type :
Manufacturer, Distributor/Wholesaler, Agent, Importer
Main Products :
High Speed / Modular Connectors, IGBT Modules, Special Purpose Amplifiers
Employee Number :
>300
Certification Level :
Verified Supplier
Discover similar products
View More

Find Similar Products By Category:

Supplier Homepage Products Ceramic Capacitors
MachineU China Products Tools & Hardware
Contact Supplier
Submit Requirement