SMW drilling rig /geotechnical drilling rig
Key Specifications
| Model | UNIT | SMW-120 | |
| Total height for column | m | 37 | |
| diameter for column | mm | Φ720 | |
| column oriented central distance | mm | 600 | |
| Adjusting angle range for column | º | ±1 | |
| Stroke for inclined supporing cylinder | mm | 2000 | |
| Adjusting stroke for column | mm | 200 | |
| Model for drilling rig | mm | ZLD65-3 | |
| Max model of diesel hammer | DH | 80 | |
| Max pulling force | KN | 680 | |
| Max turning angle | º | ±20 | |
| Walking step | mm | 2800 | |
| Ground contact pressure | Mpa | ≤0.1 | |
| Electrical engine | KW | 60 | |
| Rated pressure | Mpa | 13 | |
| Main winch for lifting drilling rig or diesel hammer etc | Single pulling force | KN | 8 |
| Wire rope speed | m/min | 0-30 | |
| Wire rope diameter | mm | Φ21.5 | |
| Wire rope capacity | m | 110 | |
| Vice winch for standing ,lifting drilling rod and pile | Single pulling force | KN | 4 |
| Wire rope speed | m/min | 0-33 | |
| Wire rope diameter | mm | Φ13 | |
| Wire rope capacity | m | 110 | |
| Total weight(T) | 90 | ||