YD11-012 Rolling Mechanics Seat with 3-Drawers Webpage Detail Page (English)

I. Product Specifications (SPECIFICATION)

II. Product Details (PRODUCT DETAILS)

1. 3 Drawers + Single-Side Tray + Bottom Bottle Holder, Comprehensive Tool Storage

• 3 Drawers for Classified Storage: Each drawer has a volume of approx. 4.4L, which can store tools by type (e.g., socket wrenches, screwdrivers, hexagon wrenches). The 22-LBS (approx. 10kg) per-drawer capacity is suitable for most small and medium-sized tools; the drawer slides are designed for silence, with a push-pull noise ≤40 decibels, which will not disturb others even in quiet 4S store maintenance areas; the total volume of 3 drawers is 13.2L, which can store a full set of basic maintenance tools without the need for an additional tool bag.
• Single-Side Tray for Easy Access: The tray is equipped with a food-grade plastic pad, which can hold frequently used tools such as long-nose pliers and test pens. The plastic pad is scratch-resistant and wear-resistant, avoiding scratches caused by direct contact between tools and steel plates; the tray edge is designed with a 2cm-high flange to prevent tools from slipping, and tools can be accessed with a stretch of the hand during maintenance, reducing the operation time of a single process by 25%.
• Bottom Bottle Holder for Safe Storage: The ABS plastic bottle holder fits 500-1000ml liquid bottles (e.g., lubricating oil, cleaning agents), avoiding the problem of placing liquids on the ground (easy to spill) or on the table (easy to tip over); the bottle holder is equipped with fixed buckles, so bottles will not shake when the vehicle is moving or the seat is relocated, adapting to the "safe storage of liquid tools" scenario.

2. 300-LBS High Load Capacity + Lightweight, Balancing Stability and Portability

• Strong Support Against Deformation: The frame is welded with 1.5mm-thick cold-rolled steel plates, combined with a "cross-shaped" reinforcing rib. The overall torsional strength reaches 380N·m, and the frame does not bend under a load of 300 LBS (approx. 136.1kg); even if a mechanic sits on the seat with 20kg tools, stable work can be maintained. Compared with lightweight seats of the same level (mostly 100kg load capacity), the stability is improved by 36%.
• 9kg Lightweight for Easy Carrying: With a net weight of only 9kg (equivalent to a bag of rice), it can be carried by an adult woman with one hand, easily moving from the warehouse to the maintenance workstation; compared with drawer-equipped seats of the same load capacity (mostly 12-15kg), the carrying difficulty is reduced by 40%, adapting to the "multi-station rotation work" demand in auto repair shops.

3. 6cm Leather-Foam Seat Surface, Balancing Comfort and Stain Resistance

• Comfortable Long Sitting Without Fatigue: The 6cm high-density foam filling balances softness and support, evenly distributing pressure on the hips and waist. After 2 hours of continuous maintenance, waist fatigue is reduced by 70%; the leather fabric has a delicate touch, and the comfort is 30% higher than that of ordinary vinyl fabrics.
• Oil Resistance and Easy Cleaning: The leather surface is coated with an anti-fouling layer. Engine oil and gear oil can be wiped clean with a dry cloth without oil penetration; daily cleaning only requires wiping with a damp cloth once a week, no additional maintenance is needed, adapting to the "oily and dusty" environment of auto repair shops.

4. 4 Swivel Casters for Flexible Movement Without Obstruction
   The 3-inch swivel rubber casters support 360° omnidirectional rotation, with a minimum turning radius of only 30cm. In areas with dense equipment in the workshop (e.g., between tool racks and multi-station maintenance areas), the seat can be adjusted by gently pushing; the rolling resistance is ≤28N, and the 9kg lightweight body combined with smooth casters allows a single person to push it 25 meters in only 1 minute; the caster friction noise is ≤45 decibels (equivalent to normal soft speaking volume), which will not disturb others in scenarios such as 4S store maintenance areas and home garages. Compared with traditional metal casters, the noise is reduced by 35%.

III. Application Scenarios (APPLICATION SCENARIOS)

1. Regular Maintenance Workstation for Cars in Auto Repair Shops
   An auto repair shop replaces the brake system for a Honda Civic, and the mechanic uses the YD11-012: The 3 drawers store brake wrenches, brake pad disassembly tools, and circlip pliers respectively; the single-side tray holds test pens and long-nose pliers; the bottom bottle holder stores brake fluid; the 300-LBS high load capacity supports the mechanic's semi-squat work, and the 6cm leather seat surface relieves fatigue from bending; the casters slide easily to different positions beside the car, shortening the maintenance time of a single vehicle from 80 minutes to 55 minutes, adapting to the "regular maintenance + centralized tool management" scenario.
2. Vehicle Maintenance Area in 4S Stores
   A 4S store conducts regular maintenance on a Volkswagen Sagitar, and the mechanic uses the YD11-012: The drawers store oil filter wrenches and sockets; the tray holds rags and gloves; the bottle holder stores small oil bottles; during maintenance, tools are accessed at any time without frequent standing up; the leather seat surface is oil-resistant and easy to clean, and can be restored to cleanliness by wiping after maintenance, enhancing the service image of the 4S store, adapting to the "professional maintenance + customer experience" scenario.
3. Basic Parts Disassembly/Assembly in Agricultural Machinery Repair Stations
   An agricultural machinery repair station assembles tire parts for a Dongfanghong tractor, and the mechanic uses the YD11-012: The drawers store tire wrenches and gaskets; the tray holds screwdrivers and pliers; the bottle holder stores grease; the 9kg lightweight body is easy to carry between different workstations in the repair station; the casters move flexibly on the concrete floor to approach the workbench for assembly, improving the parts disassembly/assembly efficiency by 20%, adapting to the "basic maintenance + portable movement" scenario.
4. DIY Repair in Home Garages
   A car owner replaces the air filter for a Wuling Hongguang MINI in his home garage, using the YD11-012: The drawer stores filter disassembly tools; the tray holds small screws; the bottle holder stores cleaning agents; the 6cm leather seat surface provides a comfortable sitting posture, and the lightweight design is easy to carry from the garage corner to the side of the car; basic maintenance can be completed without a professional tool cart, adapting to the "home DIY + convenient storage" scenario.

IV. Frequently Asked Questions (FAQ)

Q1: The total load capacity of the 3 drawers is 30kg. Will storing 35kg of tools damage the slides?

Q2: With a net weight of 9kg, can female mechanics carry it alone from the warehouse to the maintenance workstation 30 meters away?

Q3: If the leather seat surface is stained with brake oil (highly corrosive), how to clean it? Will it damage the fabric?

Q4: Can the bottom bottle holder store a 1L lubricating oil bottle? Will the bottle shake when the vehicle moves?