YD08-018 750LB (340kg) Aluminum Motorcycle Rear Stand Webpage Detail Page(English)

I. Product Specifications (SPECIFICATION)

II. Product Details (PRODUCT DETAILS)

1. Aluminum Material, Lightweight & High Load-Bearing: The main body is made of 6061-T6 aviation-grade aluminum alloy, with a net weight of only 2.5kg (equivalent to the weight of 5 bottles of 500ml mineral water). It can be easily lifted and carried by one person, no additional physical strength is needed for daily garage maintenance or outdoor emergency repair; at the same time, the aluminum alloy has high strength, with a rated load capacity of 340kg (750LB), which can stably support the rear wheel of medium and heavy-duty motorcycles (such as large-displacement cruisers and street bikes). It does not deform after long-term use, achieving the dual advantages of "lightweight portability" and "high load-bearing".
2. 25-35cm Width Adjustment, Multi-Model Adaptation: Innovatively designed with a width-adjustable structure, covering a range of 25cm-35cm, which can be flexibly adjusted according to the rear wheel spacing of different motorcycles — compatible with small-displacement scooters (rear wheel spacing approx. 25cm), medium-sized street bikes (approx. 30cm), large cruisers (approx. 35cm) and most other models. There is no need to purchase separate stands for different models. Compared with fixed-width stands, the model adaptation rate is increased by 90%, with extremely strong compatibility.
3. Bobbin Hook + Soft Rubber Protection, Vehicle Care in Details: Equipped with bobbin hook adaptors, which can lift the rear wheel through the motorcycle's built-in bobbins, replacing the traditional swing arm lifting method, avoiding deformation and wear caused by long-term stress on the swing arm; the surface of the adaptors is wrapped with soft rubber, which does not scratch the paint or damage components when in contact with the vehicle body. It is especially suitable for high-value or collectible motorcycles, protecting the beloved vehicle from details and reducing potential damage during maintenance.
4. Soft Solid Rubber Wheels, Flexible & Floor-Friendly: The bottom is equipped with soft solid rubber wheels, which are flexible and wear-resistant — no harsh noise during movement, avoiding disturbing family members or neighbors; at the same time, they do not damage the ground (such as garage epoxy floors and shop tile floors). The wheel set has low rolling resistance, and one person can easily push the stand to adjust the rear wheel position, adapting to flexible switching between multiple workstations and improving the convenience of maintenance operations.

III. Application Scenarios (APPLICATION SCENARIOS)

1. Rear Wheel Maintenance for Individual Motorcycle Enthusiasts: When enthusiasts maintain the rear wheel components of their own motorcycles (such as replacing the rear tire, cleaning the chain, and adjusting the rear brake), they can lift the rear wheel with this stand — the 2.5kg lightweight design is easy to carry to the garage, the 25-35cm width adjustment adapts to their own motorcycle model, and the bobbin hook avoids vehicle damage. Basic rear wheel maintenance can be completed independently by one person without relying on professional equipment.
2. Rear Wheel Operations in Small-to-Medium Motorcycle Repair Shops: When the shop undertakes motorcycle rear wheel repair business (such as rear wheel bearing replacement, chain replacement, and rear shock adjustment), this stand can be used as a dedicated tool: the 340kg load capacity stably supports the rear wheel, the width adjustment quickly adapts to different models, and the soft rubber wheels do not scratch the shop floor; the lightweight design is convenient for transfer between narrow workstations, reducing the physical consumption of technicians and increasing the daily maintenance volume.
3. Rear Wheel Modification in Motorcycle Custom Workshops: When custom workshops carry out personalized modifications on the rear wheel of motorcycles (such as replacing the rear swing arm, installing a rear fender, and upgrading the rear wheel hub), the width adjustment function of the stand can accurately fix the rear wheel position, and the bobbin hook avoids vehicle body deformation caused by stress during modification. The aluminum material is non-magnetic, which does not affect the installation of electronic components, adapting to the needs of "fine modification and safe fixation".
4. Emergency Maintenance for Motorcycle Racing Logistics: In races such as off-road races and road races, when participating motorcycles need quick rear wheel inspection or repair (such as replacing racing tires and adjusting chain tension), this stand can be carried to the racecourse by the logistics team — the ultra-light weight of 2.5kg is convenient for transportation, the width can be quickly adjusted to adapt to the participating models, and it can be assembled and put into use within 5 minutes, helping technicians efficiently complete emergency repairs and avoid race delays.

IV. Frequently Asked Questions (FAQ)

Q1: Can the 340kg load capacity adapt to the rear wheel of a heavy-duty cruiser weighing 320kg?

Q2: After adjusting the width, how to ensure the stand is locked firmly to avoid displacement during maintenance?

Q3: After long-term use, the soft rubber wheels are severely worn. How to replace them?

Q4: Will the aluminum material oxidize and rust when in long-term contact with oil and moisture? How to maintain it?